1966 Alfa Romeo Duetto on 2040-cars

Auto blog

Alfa Romeo Milano revealed as brand's first full EV offering

Alfa Romeo has made it clear it's going to fully electric models over the next few years, and that seems to be starting with the newly revealed Milano. It's a subcompact SUV, and while it seems that it will be offered with an internal combustion engine (similar to its platform-mate, the Jeep Avenger), Alfa has only talked about the EV powertrains to start with. And at least one of them sounds quite entertaining. Styling-wise, there's no mistaking the Milano for anything but an Alfa. It's very curvy, and has the prominent inverted triangle grille that's the brand's signature. It adopts some boomerang-shaped headlights that blend into additional air inlets on either side of the grille. That inverted triangle grille can feature different patterns, such as the mesh with classic "Alfa Romeo" script shown on the blue example, or the zoomed-in Alfa shield pattern shown on the red one. The tail features a wide rear that attempts to ape the "kamm tail" of the Alfa Romeo TZ sports car. We're not sure how successful it is at that, but it still looks solid. The Milano is fairly small. It comes in at just over 164 inches long and 70 inches wide, or around the size of a Kia Soul. It's also about 2 inches shorter in length than a Jeep Renegade, but that also makes it about 4 inches longer than the diminutive Jeep Avenger.  The interior is pretty typical Alfa, too. The 10.25-inch instrument screen is housed in a double-barrel shroud, and the 10.25-inch infotainment screen is mounted a little lower and canted toward the driver in the center stack. Round air vents bookend the dashboard. Powertrain details aren't complete, but the basics are there. The standard versions will get a 156-horsepower single motor at the front, while the Veloce gets a 240-horsepower single front motor. Both get a 54-kWh battery pack. On the WLTP cycle, the 156-horsepower version gets 250 miles of range. That would undoubtedly be lower on the EPA cycle if the car were to be offered here. And while there's no number for the Veloce, you can also count on that being lower than the standard model. The Veloce doesn't just get more power, though. It sits an inch lower on 20-inch wheels, and it gets stiffer front and rear anti-roll bars. The front brakes are upgraded to four-piston calipers with larger 15-inch rotors. Capping everything off is a Torsen limited-slip differential. It sounds like an awful lot of fun (and also sounds a bit like the setup for the Fiat 600e Abarth).

Alfa Romeo SZ, the brutalist 'Il Mostro,' restored by FCA Heritage

Nicknamed Il Mostro — "the Monster" in Italian — because of its unusual, almost brutalist design, the 1989 Alfa Romeo SZ was meant to showcase all the technological prowess of the Milanese firm at the time. It was also meant to plant a stake in the ground and return the revered marque to its rear-wheel-drive roots. Though it was an evolutionary dead end, the SZ is still considered among the most distinctive cars in a brand filled with distinctive models. It should, then, be no surprise that FCA Heritage, the classic car and history preservation arm of Stellantis (which, apparently, was not part of the name change) has just restored one. The SZ began life at the 1989 Geneva Motor Show as the ES-30 concept, which stood for Experimental Sports 3.0-liter. The production car was named SZ for Sprint Zagato, but the design is credited to Robert Opron of the Fiat Style Center, while Antonio Castellana did the finishing details and interior. Zagato used its coachbuilding expertise to build the cars, whose bodywork was formed from a composite thermoplastic material called Modar, made by Italy's Carplast and France's Stratime. Alfa Romeo also claims it was the first car to be produced using computer-aided design (CAD/CAM). Beneath the sci-fi exterior lay a 12-valve, 3.0-liter V6 plucked from the Alfa Romeo 75 3.0i Quadrifoglio Verde. With 204 horsepower and 181 pound-feet of torque, it was the most powerful Alfa of the time. Output was fed through a 5-speed transaxle and the suspension, Koni-designed shocks, and brakes reportedly tuned by Fiat and Lancia rally driver Giorgio Pianta and transplanted from the Alfa 75 1.8 Turbo Evolution Group A racer.  The original run was intended to span just 1,000 cars, but some sources say 1,036 were produced. That run ended in 1991, after which a roadster version called the RZ was built from 1992-93.  The example restored has been in Alfa Romeo's possession since the beginning. It served as a test car on the Balocco proving grounds and was used in promotional photos. There are several details on it that differ from production models, so much so that Alfa Romeo says it could be "considered a prototype." Unfortunately, as history shows, the SZ failed to usher in a real-wheel-drive renaissance at Alfa Romeo. After its end, there wasn't another rear-drive model until the 8C Competizione in 2007.

Upcoming Alfa Romeo CUV called the Stelvio, Marchionne says

Alfa Romeo will call its forthcoming crossover the Stelvio, and the Italian brand will finally put the often-postponed CUV on sale in Europe in early 2017, according to Auto Express citing FCA CEO Sergio Marchionne. We probably won't see it in showrooms here until at least spring or summer next year. The vehicle's name references the famously curvy pass through the Alps in Northern Italy, which evokes a model with sharp handling and rapid acceleration. The Stelvio uses a modified Giulia platform, and the two models should share powertrains. Standard versions would likely get a 2.0-liter turbocharged four-cylinder, which makes 276 horsepower in the sedan. However, the common parts make a Quadrifoglio version of the CUV possible, packing the hottest Giulia's 505-hp 2.9-liter twin-turbo V6, according to Auto Express. Alfa Romeo hasn't teased the Stelvio's design yet, but FCA designer Ralph Gilles posted a photo on Instagram that might have been a hint. The picture showed fellow designer of Lorenzo Ramaciotti in the back of an unnamed crossover. The dashboard, which you could see in that shot, had a distinct similarity to the Giulia. The shot didn't show much of the exterior, but you could barely make out the narrow taillights. Alfa Romeo has had serious problems launching vehicles on time recently, and the Giulia sedan and Stelvio should have been ready by now. The four-door was originally supposed to arrive in late 2015, but Marchionne said assembly would finally begin on March 14, according to Auto Express. The sedan has allegedly had problems passing internal crash tests, but Alfa officials vehemently denied this claim. The brand also delayed the CUV by several months from the original plans. The automaker now asserts that six more models are on the way by 2020, but the company doesn't seem capable of living up to those promises. Related Video: