2012 Acura Tsx Sedan 4d on 2040-cars

Auto blog

4.5 million Hondas, Acuras are being recalled worldwide to fix a fuel pump defect

Honda is recalling more than 4.5 million cars worldwide because of a fuel pump problem that could lead to engine failure or stalling in traffic, which could cause an accident. The recall includes 2.54 million vehicles in the United States. The automaker had previously recalled 628,000 U.S. vehicles in 2021 and 136,000 in 2020 for the same issue. Honda issued recalls over the same issue earlier this month in China and Japan. National Highway Traffic Safety Administration recall documents say the impellers inside fuel pumps of 2017-2020 Hondas and Acuras were improperly made, meaning they “can deform and interfere with the fuel pump body” over time. This could prevent the engine from starting, or can cause a stall while driving, which depending on the situation in traffic, could be dangerous. Fortunately, Honda says it hasn't received any reports of crashes or injuries. To remedy the problem, Honda will replace the in-tank fuel pumps, at no cost to owners, in the entire U.S. recall population of 2,539,902 vehicles, though the defect may be present in only 1 percent of those cars. Because of the size of the recall, repairs will be done in phases, with first owners receiving notification letters in February. Dealer notifications began this week. “Countermeasure replacement parts are not available in sufficient quantities for all recalled vehicles at the time of this announcement, and American Honda intends to notify vehicle owners in stages," Honda wrote. Meanwhile, owners wishing to confirm that their vehicle is included can enter their VIN at the NHTSA recall site or at American Honda's and Acura's recall platforms.  NHTSA's campaign number for the recall is 23V858000. Honda's numbers for this recall are KGC and KGD. Owners may also contact Honda customer service by phone: 1-888-234-2138.

UPDATE: 2021 Acura RDX PMC Edition price set

The 2021 RDX is the latest in Acura's lineup to get the PMC Edition treatment. This limited-run, hand-built model follows the TLX and MDX PMC Editions and be finished in the same Thermal Orange Pearl that was pioneered on the NSX.  Blessedly, the "PMC in PMC Edition doesn't stand for pumpkin-anything. Rather, it's shorthand for the facility where just 360 examples of this crossover will be hand-assembled: Acura's Performance Manufacturing Center — the home of the Acura NSX — on Honda's Marysville, Ohio, campus. Each PMC Edition arrives in Marysville as a "body in white," ready to assemble and receive the paint process normally reserved for the NSX. The PMC Edition will be equipped similarly to an RDX with the A-Spec and Advance packages, with one exception: Acura's Super-Handling All-Wheel Drive system will be standard.  Otherwise, the PMC Edition is mechanically identical to the RDX, whose A-Spec already boasts a sporty exterior treatment to boot. The PMC Edition jazzes that up even further with gloss black wheels, a body-color grille surround, black chrome exhaust finishers, a gloss-black roof, gloss-black side mirrors and gloss-back door handles.  Inside, the theme is essentially inverted, with the black leather upholstery, steering wheel and floor mats all getting orange contrast elements. Apart from the serial number placard on the center console, the rest of the PMC Edition's interior is identical to that of a standard RDX equipped with the aforementioned packages.  Acura says the RDX PMC Edition will be priced at $51,000, with customer deliveries starting in October — just in time for jack-o-lantern season. Made you work for that one, didn't we?

Honda sending two NSX racers and new EV concept to Pikes Peak

Honda is always good for a few interesting Pikes Peak entries. In 2015, Acura supplied a 2017 NSX prototype for pace-car duty. This time around, two NSXes will compete alongside a reconfigured version of the company's four-motor electric racecar. Those aren't the 2016 entries above. The one on the right is last year's pace car and the one on the left is a first-gen NSX that did the hillclimb the past few years. The 2016 cars haven't been unveiled yet, but we know that one will be in the Time Attack 2 Production class, which is mostly stock with the addition of items like a roll cage, and the other will be in Time Attack 1. TA 1 allows modifications to the powertrain, additional aero aids, suspension changes, and other tweaks, so expect to see a lot more power and a big wing on the back. The cars will be driven by James and Nick Robinson, brothers who work for Honda R&D in Ohio. Honda will use a version of the four-motor electric powertrain from its 2015 CR-Z Exhibition class entry in a new EV. (We got to drive a non-race tune of this setup in Japan last year.) The 2016 version, which will wear a different body, moves to the Electric - Electric Modified class of last year's frontrunners. We're told this car is aiming for an overall win at the 2016 race; the CR-Z took 11th place overall in 2015. The EV will again be driven by Tetsuya Yamano, a Japanese Super GT driver. Oh, and there will of course be a factory entry or two from Honda's Powersports division. Honda engineer Keith Steidl will ride a 2015 TRX1000 ATV in the Pikes Peak Challenge - Exhibition Powersport class. In the past, Honda has fielded plenty of other neat stuff in the Race to the Clouds. In 2012, it ran an NSX fitted with a twin-turbo V6 from an LMP2 car, and the 2013 race saw the very practical 532-horsepower turbocharged Odyssey minivan join the Exhibition class. The 2016 race marks the Pikes Peak hillclimb's 100th anniversary (but not the 101st running since competition took some breaks back in wartime). We're looking forward to June already. Related Video: Image Credit: Honda Green Motorsports Acura Honda Electric Hybrid Racing Vehicles pikes peak exclusive