2004 Acura Tsx Road Racecar on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

Here's a sneak peek at the 2023 Acura Integra interior

Photos: Zac Palmer / Autoblog DAYTONA BEACH, Fla. — Acura staged its Integra Prototype at a display at the Rolex 24 at Daytona this weekend, inviting enterprising amateur and professional photographers alike to sneak a peak at the interior thanks to the bright Florida sun. The photos you're looking at here are ones we took at Rolex, and they essentially reveal what the 2023 Acura Integra's interior will look like. If you recall from the car's initial reveal, Acura did not show photos of the Prototype's interior. Before we dive too deep, though, we can tell that while the design appears to be final, some of the finer details are still a bit rough. Not all of the plastics, surfaces and badging look final, so don't expect everything you see here to directly port over to production. That said, this is still an awesome sneak peek at the upcoming Integra that we weren't expecting to get. From what we can see here, the interior design seems to take a cue from the Integra's underpinnings, which can be traced back to the sporty Honda Civic Si. Photos posted to integraforums.com show the prototype's dash before Acura's reps covered the upper portion to hide it from view. In them, you can see the mesh air vent design that debuted on the Civic, albeit with a different execution here (that treatment runs the full width of the dash in the Honda). Plus, the touchscreen infotainment rising from the dash is also in plain view. The seats look like Acura's latest seat style as opposed to Civic Si seats, and they even feature a neat two-tone black and white design. What does appear to be a direct Civic rip is the steering wheel, which gains an Acura badge and what looks like the rough outline of an A-Spec badge for Integra duty. We'll note that this likely means that the Integra will be offered in A-Spec trim, just like every other new Acura on sale today. The original Integra was never sold as an A-Spec in the U.S., but the RSX Type S (named Integra outside the U.S.) was available in A-Spec trim. Another difference between the Integra interior seen here versus the Civic is a new door panel design. Very little changes in the rear bench, though, as it's featuring the same drop-down armrest and pair of USB ports for rear occupants. The Integra Prototype is notably longer than a Civic Hatchback, but we didn't see any discernible increase in utility in the back.

Acura will show all-new MDX Prototype in Detroit

Acura says it will show a prototype of its 2014 MDX crossover at the 2013 Detroit Auto Show, and we'll admit that the announcement has left us in a bit of confusion. See, the Acura press release says that the MDX proto will present "Aero Sculpture" design language, "alluring proportions" and "arching body lines." It has been accompanied by a sketch (above, click to enlarge) that, indeed, shows off a swoopy, alluring CUV.
Yet we have spy shots from two months ago of what is supposed to be the 2014 MDX, and unless the camouflage is actually some sort of vehicular moo moo, there isn't really a swoopy line on it. It is stout and substantial, but not in a way that makes us think of "Aero Sculpture." We'll know in a few weeks where the truth resides. It would appear that Acura's rendering artist has done a masterful fade on the rear glass/D-pillar area of the vehicle.
If you want to see the answer in real time, the reveal will be broadcast as it happens on Acura's webcast site. There's a press release below with the details.