2006 Acura Tl Base Sedan 4-door 3.2l on 2040-cars

Auto blog

Acura preps ILX for endurance racing challenge

Acura has used the occasion of this year's SEMA show to unveil a 2013 ILX that is remarkably different from the road-going car that we are familiar with. A far distance from the rather mildly performing street car, this ILX Endurance Racer is actually prepped to race at the grueling 25 Hours of Thunderhill in Willows, California.
The ILX racers (Team Honda Research has prepped two of them for the race) have actually each been constructed using two donor ILX sedans: one body-in-white chassis and one full production-spec car that donates powertrain, interior and electronic components. Overall, increasing the performance of the car was done mostly through extensive weight reduction rather than bumps in power. No figures have been given for the output of the ILX's K24Z7 engine, though we are told that a custom intake and exhaust have been fitted, as well as a racing flywheel.
A prominent LED lighting system dominates the front fascia of the ILX, along with a huge front splitter, while a massive wing speaks to the intentions of the car.

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Acura NSX bodywork to be sheathed in zirconium e-coat, fewer paint layers

Automakers make halo cars to drum up excitement and show off what they can do, but there's more to it than that. Advanced platforms allow a company's engineers to experiment with all sorts of technologies. And in the case of the upcoming new Acura NSX, that includes new paint processes.
Speaking with Autoline in this video interview, Honda's North American Senior VP Jon Minto talked about an innovative zirconium e-coat which it's applying to the new NSX. Unlike some experimental paints developed for Formula One, however, this coating is not designed to minimize drag or enhance cooling: it's designed to be more environmentally friendly.
It's one of a few measures which Honda is implementing on the NSX before expanding it to more accessible models, along with another process that uses fewer coats to reduce energy consumption by 40 percent. Watch the interview with Autoline host John McElroy right here.