2012 Acura Mdx Awd on 2040-cars

Auto blog

Acura is launching an all-out assault on Pikes Peak

  Acura is gunning for multiple trophies at Pikes Peak later this month, sending no less than six vehicles to the famed hillclimb event. The fleet consists of two NSX race cars, two TLX Type S race cars, a TLX Type S pace car, and the 2022 MDX Type S making its first public debut. The all-volunteer team comprising Acura employees will be towing the more potent of the TLX race cars 1,300 miles from its base in Ohio to the Colorado venue with an MDX Type S. While a stock TLX Type S weighs 4,221 pounds, a mass that's pretty close to the 355-horsepower, 354 pound-foot flagship's towing capacity of 5,000, the race car is considerably lighter.  Honda put the TLX Type S on a 600-pound diet, gutting the interior and replacing parts with lightweight components like a carbon fiber hood. Naturally, aerodynamic aids like splitters, canards, and spoilers festoon the race car. On top of that, the 3.0-liter V6 it shares with the big brother MDX Type S has been modified with a with a larger turbo and additional cooling to account for the thin air approaching the 14,000-foot summit. Acura engineer Justin Lumbard will helm the TLX in the Pikes Peak Open Division, in which an Acura TLX GT race car holds the record of 9:24.433, set by Acura race veteran Peter Cunningham in 2019. Meanwhile, chassis engineer and cool-name-haver Jordan Guitar will be piloting the other TLX Type S, a more stock version with only a 300-pound diet. Both cars wear race-modified suspensions and HRE 19-inch 19 x 9.5-inch wheels wrapped in Pirelli slicks. Likewise, the NSX pairs comprise one hard-core racer and one mostly stock car each, allowing Acura to pursue wins in multiple classes. Drivers and brothers James and Nick Robinson are no strangers to Pikes Peak records. James helped Acura clinch the Hybrid Class record with a time of 10:01.913 in an NSX last year, and is now shooting for a Time Attack 1 Division championship. His NSX puts out around 625 horsepower thanks to larger turbos and reprogrammed engine software. A front splitter, large rear wing, 200-pound weight reduction are just some of the race-prep modifications. Meanwhile, Nick holds the front-wheel-drive record, set in 2018 with a first-generation Acura TLX and a time of 10:48.094. This year, Nick is behind the wheel of an NSX that's all stock — aside from safety equipment and race tires — in the hopes of achieving a Time Attack 2 production record attempt.

Honda and Acura recall 124,077 vehicles due to potential brake failure

Honda and Acura are recalling 124,077 total vehicles across numerous model lines due to a part in the brake system that was potentially improperly assembled, which could ultimately lead to brake failure. The models affected include the 2020-2021 Honda Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot and the 2020 Acura MDX. As for the issue itself, Honda says the brake master cylinder “may have been improperly fastened to the brake booster assembly during production.” Specifically, the tie rod fastener is the problem point. Honda says that if it was improperly assembled, that could result in loose or missing tie rod nuts. If this is the case, when you hit the brakes, a bending load can be placed on the brake booster tie rod studs, which could in turn cause the tie rod studs to break. This then allows the brake master cylinder to separate from the brake booster, which Honda says could result in diminished or lost brake function. Honda says it received a report of brake failure on a 2021 Pilot last year, which prompted the companyÂ’s investigation. There are no crashes, injuries or deaths related to this issue, according to Honda, but it has received two related warranty claims since September 2022. Owner notifications are scheduled to begin on August 7 this year. Honda says it will inspect and replace any missing nuts, and if any brake booster assembly components are damaged, those will be replaced, too. Related video: Recalls Acura Honda Truck Crossover Hatchback SUV Sedan

Next-gen Acura TLX spied out testing in heavy camouflage

We’re sure you all remember that stunning Acura Type S Concept from yesterday. Acura said itÂ’s meant to influence the next-gen TLXÂ’s design, and lo and behold, here is the next-gen TLX. Of course, Acura has no intentions of letting us see the production car anytime soon, so weÂ’re treated to a heavily cladded prototype in the photos here. Looking at it in profile, the camouflaged car looks a whole lot like the Type S Concept we saw yesterday. The short rear overhang is similar, but the front of the production car looks like it hangs out over the front wheels a little further – it still shares the concept's overall long-hood/short-deck proportions, though. The roof tapers down into the decklid at a shallow angle, similar to the concept car. WeÂ’re sad to see the same quad exhaust isnÂ’t protruding from the rear bumper of this tester. Instead, it gets a dual exhaust with wide, rectangular outlets on both sides. We think the car weÂ’re looking at here is likely a regular TLX, and not the spicy Type S variant most likely seen last year. ThereÂ’s one interior photo our shooter was able to snag, showing a similar infotainment screen as that used in the new RDX, something we fully expect for the production car. That touchpad system is far superior to Acura infotainment systems of the past, but it still isnÂ’t perfect. An analog tachometer is visible off to the left, indicating that the regular TLX trims probably won't introduce a fully digital instrument cluster. Not that we'd expect that; even the new RDX maintains analog gauges in its top spec. However the TLX story plays out, it wonÂ’t hurt if the production car looks just like the well-received Type S Concept. ItÂ’s unclear how long weÂ’ll have to wait to see the car in full, but we'll keep you posted.