We Finance! 2006 Acura Tsx - Fwd Power Sunroof Premium Sound System Heated Seats on 2040-cars

Auto blog

2019 Acura RDX infotainment first impressions | A first step into the touch pad world

One of the greatest design challenges in the modern automotive industry is an infotainment system that provides loads of capabilities, but is also easy-to-use and not overly distracting. Touch screens have been leading the way as the favored option, but Acura is trying a new design that relies on a touch pad with some unique tweaks to separate it from similar systems, such as those seen in competing Lexus models. And we got to try it out in the first production application, the 2019 Acura RDX compact crossover. The key feature of the touch pad is its one-to-one position functionality. What that means is that, if you have a grid of function buttons on the screen, tapping on, say, the upper left corner of the pad will highlight the button in the same area on the screen. And if you were to take your finger off the pad and tap in the opposite corner, that section of the screen would immediately be highlighted. You don't have to slide your finger across the pad to reach selections if you don't want to, and you don't have to slide back from the last function you highlighted. It basically does away with the need to move a cursor around like you would on a laptop with its mouse pad. In practice, it's a little odd to use at first because we mentally connect using a touch pad with the traditional cursor interface of the laptops we use day in and day out. As such, we forgot that we didn't have to scan the screen for the cursor every time we needed to select something. But once we remembered we could skip that, we found it quick and easy to drop our finger down and slide to our preferred function quickly. We could occasionally even pick something on the corners without having to slide at all. This is partly because Acura designed the interface to work with this pad. A representative from Acura's R&D center explained that they tried to put common functions on those corners because they're easy to reach without looking or thinking much. Another bonus to this system is that you don't immediately go to the function the second you press the pad. Instead, the feature is highlighted and still needs a physical click to enter. This is enormously helpful, since it virtually eliminates the chance of going to the wrong selection because you hit a bump or just got lazy with finger placement. Instead, you can get your finger in the right spot and then commit with a button press.

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.

Acura gives us a lightning-quick glimpse of the NSX Type S

Acura released a short preview film to give fans a fast-paced look at the limited-edition NSX Type S. Scheduled to break cover tomorrow, August 12, it's being boldly presented as the final evolution of the second-generation model. The eight-second flick posted on various social media channels provides us with a peek at the Type S' front end. It shows two cars speeding towards the camera down what looks like a race track's main straight. Acura wants to keep the Type S under wraps until its big debut, so the footage gets blurry as the cars speed by; that's why it's called a teaser. We nonetheless think we can squint and discern a redesigned front end with larger air intakes.  Acura might have chiseled bigger vents into the front bumper because the Type S needs additional cooling air. It's powered by a mid-mounted engine, but there are radiators located right behind the front bumper in the regular-production model. Of course, we're not discounting the possibility that the vents were merely added for show. As we previously reported, the visual changes will also include a red engine cover and black exterior accents. Additionally, the Type S will offer more power than the standard, 573-horsepower NSX and sharper handling. Acura will build 350 units of the NSX Type S, and 300 of those have been earmarked for the American market. The model will make its public debut on August 12 on the sidelines of Monterey Car Week, so we won't have to wait long to learn about the improvements the company has made. If you want one, act fast; if you want the first one, bid high. Serial number one will be sold to the highest bidder at Mecum's Monterey sale on August 14, 2021. The proceeds from the sale will benefit a number of charities. As for what's next, nothing suggest there's a third-generation NSX on the way, but the GT3-spec race car will soon receive a round of updates and it might continue racing until 2024. Related video: