2009 Acura Tsx 43k Miles Very Clean Smoke And Pet Free All Maintenance Performed on 2040-cars

Auto blog

Honda issues 'do not drive' order for older cars with recalled Takata airbags

Honda and Acura instructed owners of more than 8,000 cars built from 2001-2003 to park them until they can have their Takata airbags replaced as part of the ongoing global campaign to eliminate millions of deadly inflators. Honda says the "Alpha" generation Takata inflators can fail at rates as high as 50%, causing potentially fatal injuries from flying shrapnel in the event of a collision.  Honda and Acura models with the "Alpha" generation Takata airbags include:  2001-2002 Honda Accord  2001-2002 Honda Civic  2002 Honda CR-V  2002 Honda Odyssey  2003 Honda Pilot  2002-2003 Acura 3.2 TL  2003 Acura 3.2CL "Approximately 8,200 Honda and Acura vehicles with the most dangerous airbags are still being driven today. Honda has replaced or accounted for more than 99% of Alpha inflators, but it is absolutely critical that these remaining vehicle owners act now to protect themselves and their loved ones," Honda's announcement said. "These vehicles are 20 to 22 years old now, and the risk to vehicle occupants is dire. Alpha air bags are some of the oldest under recall, and they have a 50% failure rate. If the inflators rupture, the metal fragments ejected toward the driver’s face could kill or leave them with devastating, life-altering injuries." Honda and Acura are far from the only brands whose models were built with defective inflators. A campaign has been underway for the better part of a decade to replace millions of the devices worldwide as drivers continue to die from injuries caused by exploding inflators.  All such repairs are free of charge to customers. Acura/Honda Customer Service can be reached at 888-234-2138 or by visiting their Takata website.   Recalls Acura Honda Ownership Safety Takata airbag recall

Autoblog Minute: VW finds CO2 'irregularities', Takata dropped by automakers, SEMA recap

Volkswagen's diesel emissions scandal gets a new wrinkle, US regulators hit Takata Corporation with a substantial fine, and we head to Las Vegas for a look at tuner paradise at the 2015 SEMA show. Autoblog senior editor Greg Migliore reports on this edition of Autoblog Minute Weekly Recap. Show full video transcript text [00:00:00] Volkswagen's diesel emissions scandal gets a new wrinkle. US regulators issue a significant fine to Takata Corporation. And we take a peek inside tuner paradise at the 2015 SEMA show. I'm senior editor Greg Migliore and this is your Autoblog Minute Weekly Recap. The VW diesel emissions scandal, first brought to light in September, gets a new wrinkle, as an internal investigation by the German automaker revealed [00:00:30] irregularities in CO2 emissions that could affect approximately 800,000 vehicles. VW estimates the issue could pose a 2-billion euro economic risk. VW claims that most of the vehicles affected have diesel engines, but industry analysts say a 1.4-liter gas engine is also affected. VW says that fuel consumption figures were set too low during the CO2 certification process. During all of this, sales of some diesel-powered Volkswagen, Audi, and Porsche models [00:01:00] have been halted. Takata Corporation is back in the news in connection with its deadly airbag scandal. Federal regulators fined Takata $70 million. If the parts supplier does not comply, the fine could balloon to $200 million. Takata was also dropped this week by its biggest customer, Honda. And now, Toyota and Mazda will be following Honda's lead in dropping Takata. We're also hearing that Mitsubishi and Subaru are considering a switch in air-bag inflator suppliers. SEMA 2015 [00:01:30] came and went. We saw offerings from Mopar, like the AWD Challenger concept. Honda unveiled a Ridgeline that it will race at the Baja 1000, which gives us a hint at what future production model could look like. The celebrity presence was also felt in Vegas as it always is. Kid Rock brought a Duramax Diesel Chevy Silverado, and Acura restored and presented Ludacris with his now famous 1993 Acura Legend. Those are the highlights from the week that was. Be sure to come back on Saturday for my full recap, [00:02:00] where I'll have some added insight into Hyundai's foray into the luxury sector. For Autoblog, I'm Greg Migliore. Autoblog Minute is a short-form video news series reporting on all things automotive.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.