2008 Acura Tsx Base Sedan 4-door 2.4l on 2040-cars

Auto blog

Hondata's 2019 Acura RDX tune brings the mid-range torque

One of the big advantages to the era of turbo Hondas is that there's plenty of horsepower and torque left on the table for tuners to take advantage of. One of those companies is Hondata, and following its upgrades for the Civic and Accord, it's now tuning the Acura RDX luxury crossover. The RDX uses a turbocharged 2.0-liter engine similar to those in the Accord and the Civic Type R. In stock form, it makes 272 horsepower and 280 pound-feet of torque. With Hondata's Stage 1 tune, the company says that horsepower increases by about 10 across the rev band. Looking at the dyno graph, it also appears that peak horsepower increases by about 5 horsepower, and peak torque is up by about 15 pound-feet. Peak torque also appears to arrive sooner, and most of the torque curve seems to be up by 10 to 15 pound-feet. The increases in power and torque are available in all four of the RDX's drive modes. The Stage 2 tune increases power torque even more in Sport and Sport+ modes, and keeps Snow and Comfort modes at Stage 1 settings. Peak horsepower looks to be up about 10 over stock, but the mid-range sees as much as a 28-hp increase. Peak torque sees a huge jump of about 45 lb-ft over stock based on the dyno chart, and it's available even lower than the Stage 1's peak torque. If this all sounds good to you, you can order up a Hondata FlashPro computer for your RDX right now. It costs $695 and comes with the handheld computer for uploading or removing tunes. RDX owners in California should note that neither tune is currently CARB legal. Related Video:

2020 Acura TLX PMC Edition Driveway Test | Shine bright like a ... ruby

Valencia Red Pearl. That’s the story with the 2020 Acura TLX PMC Edition. We got to see this limited edition TLX sedan at the New York Auto Show last year, but now itÂ’s in my driveway. The show lights donÂ’t do this paint justice. The setting sun reflecting off the deep and vibrant red ... now that's how this car is meant to be gazed upon. Like I mentioned in the video walkaround above, the TLX PMC Edition is hand-assembled at the Performance Manufacturing Center in Ohio. The body-in-white is trundled across town to the NSX supercar factory where those technicians do the rest to make it road-worthy. All 360 of them are being wrapped in their own special car covers and delivered to dealers on an enclosed truck to make sure it arrives without a single exterior flaw. About that paint Valencia Red Pearl is a $6,000 paint option on the Acura NSX. On the TLX PMC, itÂ’s $0. The paint process itself is time consuming and intensive. Acura says the vibrancy and high-color saturation is thanks to nano pigment technology.  “Engineered using mica, metal flake and super-high transparency nano pigments, the paint is applied using PMC's advanced robotic paint system in multiple base coats to enhance color intensity. This is followed by two clear coats to increase the paint's luster,” AcuraÂ’s description reads. 2020 Acura TLX PMC Edition View 43 Photos The five-day process is well worth it. IÂ’ve tried my best to illustrate it through photos and video, but itÂ’s still not representative enough of this red paint. It has a depth and shimmer to it, as if the body panels were a swimming pool, awaiting a cannonball dive into the deep end. This car being an exclusive, special edition vehicle hasnÂ’t destroyed the value proposition either. In actuality, the TLX PMC is the one to buy if you want a fully-loaded TLX. Acura doesnÂ’t allow you to option the A-Spec and Advance packages together with the standard TLX, but both of those are included with the PMC Edition. If you were able to combine all those packages, the final price would ring up to $50,650. The final price on our test car is $50,945, including the $1,995 destination charge on the sticker. Basically, youÂ’re getting every option in the book at around list price, plus all of the special PMC Edition extras for next to nothing. Why yes, of course weÂ’ll have the PMC Edition. It drives just like the TLX A-Spec — check out our full review of that car here.

2019 Acura RDX named a Top Safety Pick+ by IIHS

To the accolades being heaped on the all-new 2019 Acura RDX, the automaker can now add another: a Top Safety Pick+ designation from the Insurance Institute for Highway Safety, the organization's coveted top rating. IIHS cites the SUV's good crashworthiness ratings, standard front crash prevention technology and even the availability of "good"-rated headlights, which has become perhaps the group's most daunting hurdle. To qualify for IIHS's top award, a vehicle must earn "good" ratings in the driver-side small overlap front crash test, moderate overlap front, side, roof strength and head restraint tests and an "acceptable" or "good" rating in passenger-side small overlap test. The RDX earns "good" ratings across the board. IIHS also rated the standard AcuraWatch safety technology as "superior," saying it avoided collisions at 12 and 25 mph, and it rated the base LED headlights as "good" and the curve-adapted headlights on the top-of-the-line Advance trim as "acceptable." Autoblog recently learned that 40 vehicle models earned good enough crash ratings to qualify for IIHS' Top Safety Pick rating but fall short because they don't meet the organization's criteria for good headlights. Acura says the 2019 RDX features the newest generation of its Advanced Compatibility Engineering body structure, plus new high-strength steel door stiffener rings and eight airbags. The AcuraWatch suite of safety technologies includes collision mitigation braking, adaptive cruise control and road departure mitigation, all standard. The RDX is powered by a 2.0-liter turbo-four engine that makes 272 horsepower and 280 pound-feet of torque and comes with a 10-speed automatic. The compact luxury crossover went on sale June 1 and set monthly sales records in both June and July. You can find Autoblog's driving review of the 2019 RDX here. Related Video: