2010(10) Acura Tl Fwd 6disccdchanger Powermoonroof Hidheadlights 17s on 2040-cars

Auto blog

1997 Acura SLX gets 350 actual Acura horsepower for Radwood

For the Radwood Orange County, Calif., car show, a show themed around 1980s and 1990s cars, Acura is bringing a variety of its original models including a 1991 NSX and a 1986 Integra. The company is also bringing something obscure, a 1997 Acura SLX, the brand's first SUV, offered from model years 1996 to 1999. In some ways, it's something Acura might not want to highlight, since it's really a rebadged Isuzu Trooper, just as the original Honda Passport was a rebadged Isuzu Rodeo. But this SLX is special; it has real Acura power under the hood. The project was led by Acura engineers and Pikes Peak racing drivers James Robinson, Paul Hubers and Jordan Guitar, and the frame and body restoration as well as the powertrain swap was done entirely in-house at Honda R&D in Ohio, according to Acura rep Andrew Quillin. The team pulled out the original naturally aspirated 3.2-liter V6 that made just 190 horsepower and 188 pound-feet of torque, and dropped in a turbocharged 2.0-liter inline-four from a new Acura RDX. That engine also received a new intake, exhaust, turbo and ECU tune, which brought power up to an estimated 350 horsepower and 340 pound-feet of torque, similar to the Graham Rahal Performance RDX. Not only that, but the old-school four-wheel-drive system and live rear axle were dropped in favor of the RDX's indpendent suspension and torque vectoring "Super Handling All-Wheel Drive." "Dropped in" is a mischaracterization, though, as Acura had to weld new subframes front and rear to the existing frame to get the transverse engine and modern suspension to fit. Acura was careful to keep the SLX looking as close to the original as possible. On the outside, Acura repainted the SLX in a modern red paint available on the RDX, but retained the champagne lower moldings. The stock wheels were replaced with 17-inch Fifteen52 wheels, but they have a very similar design and finish to the original wheels. A hard-shell spare tire cover was added, and a simple "SH-AWD" badge on the back is the only hint at what's under the body. The interior was restored at the company's L.A. design studio, where the upholstery was redone in a gray "gathered" leather like you would have seen when it was new. A bit of gray wood trim updates the interior slightly. The RDX's push-button starter and shifter buttons have been added to the center console, shift paddles behind the original steering wheel, and an aftermarket instrument cluster mounted to the steering column.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.

The new Acura Integra was never meant to be a retro car

The new Acura Integra Prototype was never supposed to be a retro or nostalgic design process. It would be easy to assume it was, as Acura’s messaging leading up to the big reveal leaned heavily on the Integra nameplate's heritage. From the model name embossed in the bumpers, to videos of shifting the older modelÂ’s manual transmissions, Acura yanked fairly hard on our heartstrings. And then the cover came off last week, and while there are very subtle cues hinting at old Integras here and there, the new car doesnÂ’t look much like the old ones at all. Unlike designers of the new retro-tastic Nissan Z and Ford Bronco, Acura decided to create something altogether new and different. “So, admittedly, when we started planning this car, it was never to create a retro Integra,” Acura product planner, Jonathan Rivers, told Autoblog. “We actually looked at it from the viewpoint of say, if the Integra had never left the lineup, how would it have evolved? How would it have changed over the years? We think this is the result of that.” There was never going to be a two-door coupe model, because as Rivers points out to us, coupes just don't sell these days. However, sportbacks are popular — just look at the sheer number of them coming from Germany these days — and it suits the customers Acura is trying to capture with the Integra. “The target customer is a millennial with an active lifestyle, so they need space for their gear but they also want to have a great car to hit the canyon roads with every now and then,” Rivers says. “Once again, over the generations, the Integra is just that.” For any naysayers throwing their hands up about the Integra seemingly being a fancy Civic, we possess two points of refutation. One, thatÂ’s exactly what the Integra has always been. It was literally badged and sold as a Honda in many other countries, and its bones have always been Civic-based. ThatÂ’s the IntegraÂ’s history, and while Acura doesnÂ’t officially come out and say so, itÂ’s most certainly the same today. On the design front, maybe you think the photos make it look a little too close to the new 11th-gen Civic Hatchback? Well, pictures on the internet donÂ’t always tell the full story of a car design. “None of the sheetmetal is shared with either the four-door or the five-door Civic,” Rivers explains.