2006 Used 3.2l V6 24v Automatic Fwd Sedan Premium on 2040-cars

Auto blog

Rare 1999 Acura NSX Zanardi Edition sells for $135,000

Somebody just bought a 1999 Acura NSX Zanardi Edition for $135,000 on Bring a Trailer. And to that we say, we’re jealous. The Zanardi Edition is one of the more sought-after NSX models out there. Acura only ever sold 51 of them (named after racer Alex Zanardi), and they were sold during a time that nearly every NSX sold here was an NSX-T with the T-top. The hardtop Zanardi Edition features a number of performance improvements over a typical 1999 NSX. Acura took a sizable chunk of weight out of the car. Versus a hardtop coupe, itÂ’s about 54 pounds lighter. Compared to the more popular NSX-T, itÂ’s 149 pounds lighter. This was done in a few ways, but the single biggest weight reduction was due to the power steering delete, making it more like the older NSXs that never had power steering. Lightweight BBS wheels, a lighter battery, single-pane rear glass and a lighter rear spoiler also helped to reduce weight. It received a “racetrack-tuned suspension” that was considerably stiffer than the regular NSX. The shocks, springs and bushings were all revised, and Acura lowered the ride height (0.6 inch in front, 0.3 inch in rear). A stiffer and larger rear stabilizer bar was fitted, too. The Zanardi Edition is rather distinctive looking because of its New Formula Red paint and dark BBS wheels. Acura added red stitching to the all black interior, and owners also got to use a sweet titanium shift knob. And of course, thereÂ’s a special edition plaque on the interior to officially declare it a Zanardi.  Acura did nothing to the engine or transmission. Therefore, it retains the 3.2-liter V6 (290 horsepower and 224 pound-feet of torque) and six-speed manual. We donÂ’t get to see many Zanardi Editions go up for sale, but when they do, they get the big bucks. At 57,000 miles, this one is still on the low side, hence the $135,000 final bid. A regular (albeit newer) 2004 NSX-T with 1,900 miles just sold for $133,000 earlier today. So yeah Â… NSX values donÂ’t seem to be going anywhere but up these days. Related video:

1997 Acura SLX gets 350 actual Acura horsepower for Radwood

For the Radwood Orange County, Calif., car show, a show themed around 1980s and 1990s cars, Acura is bringing a variety of its original models including a 1991 NSX and a 1986 Integra. The company is also bringing something obscure, a 1997 Acura SLX, the brand's first SUV, offered from model years 1996 to 1999. In some ways, it's something Acura might not want to highlight, since it's really a rebadged Isuzu Trooper, just as the original Honda Passport was a rebadged Isuzu Rodeo. But this SLX is special; it has real Acura power under the hood. The project was led by Acura engineers and Pikes Peak racing drivers James Robinson, Paul Hubers and Jordan Guitar, and the frame and body restoration as well as the powertrain swap was done entirely in-house at Honda R&D in Ohio, according to Acura rep Andrew Quillin. The team pulled out the original naturally aspirated 3.2-liter V6 that made just 190 horsepower and 188 pound-feet of torque, and dropped in a turbocharged 2.0-liter inline-four from a new Acura RDX. That engine also received a new intake, exhaust, turbo and ECU tune, which brought power up to an estimated 350 horsepower and 340 pound-feet of torque, similar to the Graham Rahal Performance RDX. Not only that, but the old-school four-wheel-drive system and live rear axle were dropped in favor of the RDX's indpendent suspension and torque vectoring "Super Handling All-Wheel Drive." "Dropped in" is a mischaracterization, though, as Acura had to weld new subframes front and rear to the existing frame to get the transverse engine and modern suspension to fit. Acura was careful to keep the SLX looking as close to the original as possible. On the outside, Acura repainted the SLX in a modern red paint available on the RDX, but retained the champagne lower moldings. The stock wheels were replaced with 17-inch Fifteen52 wheels, but they have a very similar design and finish to the original wheels. A hard-shell spare tire cover was added, and a simple "SH-AWD" badge on the back is the only hint at what's under the body. The interior was restored at the company's L.A. design studio, where the upholstery was redone in a gray "gathered" leather like you would have seen when it was new. A bit of gray wood trim updates the interior slightly. The RDX's push-button starter and shifter buttons have been added to the center console, shift paddles behind the original steering wheel, and an aftermarket instrument cluster mounted to the steering column.

Acura Integras worked over by 3 popular tuners as SEMA custom builds

The Specialty Equipment Market Association (SEMA) show is a chance for aftermarket manufacturers and automakers to come together with potential customers and the media to show off their custom rides. Honda and Acura are no strangers to the event, as people have been bringing hotted-up models from both automakers to the show for years. This year, three builders are bringing their interpretations of Acura’s newest car, the 2023 Integra. Acura gave the car to Daijiro Yoshihara, Sara Choi, and Coco Zurita, and each came up with a unique build for the car. YoshiharaÂ’s car features a Spoon air filter and exhaust, BBS REV7 wheels, EVS tuning exterior components, and a host of motorsport-ready interior upgrades. ChoiÂ’s Integra features a GReddy intercooler and oil cooler, Advan wheels, a wide body kit, and Battle Craft interior parts. Zarita installed several powertrain upgrades, including an AÂ’PEXI exhaust, an HPS cold air intake, a GReddy intercooler, and HPS turbo components. The cars made their debut at The Petersen Museum on October 23 and will head to SEMA from November 1-4. From there, Acura will take them to Radwood L.A. on November 19 and the Acura Grand Prix of Long Beach on April 14-16. The Integra is still relatively new, so the aftermarket doesnÂ’t offer the wealth of upgrades that older Honda Civics and other Japanese cars enjoy. Some companies have already released dedicated tunes and other car mods, so weÂ’re hopeful these SEMA rigs will help jumpstart development for the vehicle.