2000 Acura Tl Base Sedan 4-door 3.2l on 2040-cars

Auto blog

Acura announces NSX GT3 Evo22 race car will live on

The Acura NSX may be winding down production in 2022, but it still has some life left on the track. Today, Acura announced that it will introduce a new version of its NSX GT3 race car. It features a slew of improvements that should make the platform more competitive. Called the NSX GT3 Evo22, it builds upon the existing NSX GT3 a car that has won multiple championships in IMSA, SRO and Japan's SuperGT. The Evo22 gets improved intercoolers for the 3.5-liter twin-turbo shared with the road car, allowing it to perform consistently in a wider range of conditions and locations. Underneath, the suspension earns some tweaks in revised spring rates and geometry adjustments. To improve the car for endurance racing, the Evo22 reduces pit time with larger fluid tanks, while a revised wheel system allows for quicker tire changes. An FIA-mandated rain light illuminates the rear. Acura will also offer several air conditioning and headlight options. As with the outgoing NSX GT3, the Evo22 eschews the road car's hybrid and all-wheel-drive systems. Instead, it employs an XTRAC semi-automatic six-speed sequential transmission to send power to the rear wheels. Both the race and road car, however, share the same specs for the engine block, heads, valvetrain, crankshaft, pistons, and dry-sump lubrication system. The motors and chassis are both built at Acura's Performance Manufacturing Center in Ohio, while final assembly for the GT3 takes place in Milan, Italy. While European GT3s are supported from Italy, Honda Performance Division in Southern California will support North American teams. The NSX GT3 is the defending IMSA GTD and SRO GT Manufacturers’ Champion, and has achieved 25 IMSA and SRO class wins since its North American introduction in 2017. Interestingly, Acura says the the NSX GT3 is homologated globally through 2024. So, while new road cars won't be produced after next year, you'll still see them representing the "A" calipers at the track beyond that.

2014 Acura MDX Prototype is exactly what we expected

Yep, it's the new MDX. And despite being totally redone, it looks exactly like we expected. That is, it's an up-sized version of the RDX crossover with fancy LED lights stolen from the RLX sedan. And while that might not sound too exciting, we have to say, it is handsome - certainly a more cohesive, refined design than the angular, beak-tastic model that's currently on sale.
Acura is calling this 2014 MDX a prototype, but that's only because it isn't 100-percent finished. Everything you see here will likely carry over to production, maybe with a couple small tweaks. Under the hood is the same 3.5-liter V6 that we know and love from the Honda group, and while we don't have power figures just yet, Acura says it will deliver more torque while improving efficiency. In redesigning the MDX, the Japanese automaker has managed to lighten and stiffen the chassis, improving driving dynamics. More interestingly, for the first time Acura will offer a front-wheel-drive version of the MDX, but don't worry, the automaker's SH-AWD all-wheel drive will be available.
Inside, the usual smattering of tech goodies will be on hand, including the next-generation AcuraLink system, satellite radio, tons of comfort amenities and every single alphabetic safety device known to man (okay, maybe not all of them).

Honda and Acura recall 124,077 vehicles due to potential brake failure

Honda and Acura are recalling 124,077 total vehicles across numerous model lines due to a part in the brake system that was potentially improperly assembled, which could ultimately lead to brake failure. The models affected include the 2020-2021 Honda Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot and the 2020 Acura MDX. As for the issue itself, Honda says the brake master cylinder “may have been improperly fastened to the brake booster assembly during production.” Specifically, the tie rod fastener is the problem point. Honda says that if it was improperly assembled, that could result in loose or missing tie rod nuts. If this is the case, when you hit the brakes, a bending load can be placed on the brake booster tie rod studs, which could in turn cause the tie rod studs to break. This then allows the brake master cylinder to separate from the brake booster, which Honda says could result in diminished or lost brake function. Honda says it received a report of brake failure on a 2021 Pilot last year, which prompted the companyÂ’s investigation. There are no crashes, injuries or deaths related to this issue, according to Honda, but it has received two related warranty claims since September 2022. Owner notifications are scheduled to begin on August 7 this year. Honda says it will inspect and replace any missing nuts, and if any brake booster assembly components are damaged, those will be replaced, too. Related video: Recalls Acura Honda Truck Crossover Hatchback SUV Sedan