Tech Pkg 3.7l Nav Cd Awd No Reserve Abs 4-wheel Disc Brakes Brake Assist on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

2017 Acura NSZ #001 Rolls Off Line In Ohio | Autoblog Minute

The first 2017 Acura NSX rolled off the assembly line this week in Marysville, Ohio. Marking the return of the iconic supercar. VIN #001 went to Nascar Owner Rick Handpick.

Honda and Acura recall 124,077 vehicles due to potential brake failure

Honda and Acura are recalling 124,077 total vehicles across numerous model lines due to a part in the brake system that was potentially improperly assembled, which could ultimately lead to brake failure. The models affected include the 2020-2021 Honda Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot and the 2020 Acura MDX. As for the issue itself, Honda says the brake master cylinder “may have been improperly fastened to the brake booster assembly during production.” Specifically, the tie rod fastener is the problem point. Honda says that if it was improperly assembled, that could result in loose or missing tie rod nuts. If this is the case, when you hit the brakes, a bending load can be placed on the brake booster tie rod studs, which could in turn cause the tie rod studs to break. This then allows the brake master cylinder to separate from the brake booster, which Honda says could result in diminished or lost brake function. Honda says it received a report of brake failure on a 2021 Pilot last year, which prompted the companyÂ’s investigation. There are no crashes, injuries or deaths related to this issue, according to Honda, but it has received two related warranty claims since September 2022. Owner notifications are scheduled to begin on August 7 this year. Honda says it will inspect and replace any missing nuts, and if any brake booster assembly components are damaged, those will be replaced, too. Related video: Recalls Acura Honda Truck Crossover Hatchback SUV Sedan