Awd 4dr Low Miles Suv Automatic Gasoline 3.5l V6 Cyl Engine Black on 2040-cars

Auto blog

J.D. Power study sees new car dependability problems increase for first time since 1998

For the first time since 1998, J.D. Power and Associates says its data shows that the average number of problems per 100 cars has increased. The finding is the result of the firm's much-touted annual Vehicle Dependability Study, which charts incidents of problems in new vehicle purchases over three years from 41,000 respondents.
Looking at first-owner cars from the 2011 model year, the study found an average of 133 problems per 100 cars (PP100, for short), up 6 percent from 126 PP100 in last year's study, which covered 2010 model-year vehicles. Disturbingly, the bulk of the increase is being attributed to engine and transmission problems, with a 6 PP100 boost.
Interestingly, JDP notes that "the decline in quality is particularly acute for vehicles with four-cylinder engines, where problem levels increase by nearly 10 PP100." Its findings also noticed that large diesel engines also tended to be more problematic than most five- and six-cylinder engines.

Acura RDX Prototype to debut at 2018 Detroit Auto Show

Crossovers make money, plain and simple. Nearly every mainstream automaker sells or is planning to sell some sort of SUV. At the 2018 Detroit Auto Show, Acura will debut the third-generation RDX Prototype. This sleek concept isn't the final production version, but it is a good preview of what we'll see coming down the pipe from Honda's premium brand. Acura says this is the most extensive redesign in more than a decade, indicating that this is a ground-up redesign rather than an overhaul of the model that's been on sale since 2013. While the current model uses a 3.5-liter V6, the new RDX will likely use a turbocharged inline-four, just like the first-gen RDX. That 2007 model was a huge oddball in Honda's naturally aspirated lineup, though turbocharging is far more prevalent today. Look for a variant of Honda's 1.5-liter turbo-four under the hood and some variant of Acura's all-wheel drive system. The teaser video gives us a brief glimpse of the car, and there's more than a little TLX buried inside. Gone is the "beak," replace by the soon-to-be ubiquitous shield grille. All of Acura's current design was previewed with the Precision Concept that showed its face nearly two years ago. We don't have many other details, but we won't have to wait too much longer. Related Video: Design/Style Detroit Auto Show Acura Crossover SUV Luxury acura rdx

2020 Acura NSX Suspension Deep Dive

The Acura NSX has been a special car as long as I’ve been in the business. The first one came out in 1990, the same year I started my career in automotive engineering. I vividly remember driving one briefly back then when we brought one in for benchmarking. I'd drive it again 22 years later when my previous employer bought a used 1991 example for a long-term test. Reader interest was sky-high and the car was still gorgeous, but the march of time and automotive engineering had clearly left it behind. Then, in 2016, a second-generation NSX emerged, and it was packed with bleeding-edge thinking. It has a 3.5-liter twin-turbo V6, but this new NSX is a hybrid with an electric motor-generator sandwiched between the engine and its nine-speed DCT transmission. Two more electric motors – one for each wheel – power the front axle. There they can add traction, regenerate electricity under braking and dole out hyper-accurate levels of torque vectoring. The carÂ’s tire package was changed from Continental SportContact 5 to SportContact 6 tires in 2019, and numerous suspension re-tuning tweaks came along with them. The result is a lively and well-balanced car that is relentless when driven hard and a pussycat around town. LetÂ’s see what theyÂ’ve got going on under there.   At first glance the 2020 Acura NSX appears to have dual wishbone front suspension. But we canÂ’t tell for sure because that big two-piece brake rotor is in the way. The coil-over shock looks obvious, but a few odd details are apparent even from here.   This view also seems to indicate double wishbone suspension. But the pivot axis (green arrow) between the upper and lower ball joints looks wrong – itÂ’s far too vertical. WeÂ’re missing something. But I would be remiss if I failed to point out a few other things before we moved on. For one, the front drive axle confirms this to be an all-wheel-drive machine. Second, the forged aluminum damper mounting fork (yellow) that envelops the axle is mounted to the lower arm about 75% out from the armÂ’s inner pivot. The spring and damper motion ratio would be 0.75-to-1 relative to wheel movement, with a tiny reduction due to its lean angle. Lastly, just look at the huge cast aluminum upright (white). Beautiful. Normally these are called hub carriers or steering knuckles, and I use the terms interchangeably. But the motorsports-derived term upright is normally applied when the piece is tall and, well, upright like this one.   This explains everything.