1993 Acura Nsx - All Stock For The Purest on 2040-cars

Auto blog

Junkyard Gem: 1997 Acura 1.6 EL

Drivers from Mexico or Canada who take their cars across the border into the United States may drive them legally here for one year, after which they must drive back home or go through a registration process that ranges from arduous to impossible, depending on the state. As a result, quite a few Canadian- and Mexican-market cars end up marooned and un-registerable here, and I find some of them during my junkyard travels. Today, we've got a Canada-only Acura that showed up in a Northern California boneyard recently. I'm always looking for junkyard odometers with very high final readings (right now a 631k-mile Volvo 240 holds the record), and at first glance I though I had come across a Civic sedan with nearly 450,000 miles. Then I noticed the metric speedometer and realized that I was looking at a non-US-market car. 448,538 kilometers is 278,709 miles, by the way. A look at the build tag and emissions stickers showed that this car was built and sold in Canada. I'd found a second-generation Acura EL in a Colorado junkyard a few years back, so I knew that I'd just found a first-generation EL. Like its Acura Integra contemporary, the Acura EL was based on the Honda Civic. It replaced the Integra in Canada for 1997 and production continued through 2005. It differed somewhat in appearance from the Civic and had a nicer interior but was mechanically nearly identical to the US-market Civic EX sedan. A version for the Japanese market was built in Canada and exported across the Pacific as the second-generation Honda Domani. The engine is a 1.6-liter SOHC four-banger with VTEC, rated at 127 horsepower and 107 pound-feet. This one appears to be a loaded EL Premium, with the optional four-speed automatic. List price would have been C$22,000, or about $30,676 in 2023 United States dollars (using the exchange rate for June of 1997). The decklid had an EL-only spoiler, so a local Honda expert must have bought it for a Civic sedan. Since this car was old enough to be federally legal under the 25-year rule, it could have been registered legally in some US states… but California's strict emissions regulations would have made the process too difficult to be worth undertaking on a near-300k-mile machine that isn't particularly exotic.

2020 Acura TLX PMC Edition Driveway Test | Shine bright like a ... ruby

Valencia Red Pearl. That’s the story with the 2020 Acura TLX PMC Edition. We got to see this limited edition TLX sedan at the New York Auto Show last year, but now itÂ’s in my driveway. The show lights donÂ’t do this paint justice. The setting sun reflecting off the deep and vibrant red ... now that's how this car is meant to be gazed upon. Like I mentioned in the video walkaround above, the TLX PMC Edition is hand-assembled at the Performance Manufacturing Center in Ohio. The body-in-white is trundled across town to the NSX supercar factory where those technicians do the rest to make it road-worthy. All 360 of them are being wrapped in their own special car covers and delivered to dealers on an enclosed truck to make sure it arrives without a single exterior flaw. About that paint Valencia Red Pearl is a $6,000 paint option on the Acura NSX. On the TLX PMC, itÂ’s $0. The paint process itself is time consuming and intensive. Acura says the vibrancy and high-color saturation is thanks to nano pigment technology.  “Engineered using mica, metal flake and super-high transparency nano pigments, the paint is applied using PMC's advanced robotic paint system in multiple base coats to enhance color intensity. This is followed by two clear coats to increase the paint's luster,” AcuraÂ’s description reads. 2020 Acura TLX PMC Edition View 43 Photos The five-day process is well worth it. IÂ’ve tried my best to illustrate it through photos and video, but itÂ’s still not representative enough of this red paint. It has a depth and shimmer to it, as if the body panels were a swimming pool, awaiting a cannonball dive into the deep end. This car being an exclusive, special edition vehicle hasnÂ’t destroyed the value proposition either. In actuality, the TLX PMC is the one to buy if you want a fully-loaded TLX. Acura doesnÂ’t allow you to option the A-Spec and Advance packages together with the standard TLX, but both of those are included with the PMC Edition. If you were able to combine all those packages, the final price would ring up to $50,650. The final price on our test car is $50,945, including the $1,995 destination charge on the sticker. Basically, youÂ’re getting every option in the book at around list price, plus all of the special PMC Edition extras for next to nothing. Why yes, of course weÂ’ll have the PMC Edition. It drives just like the TLX A-Spec — check out our full review of that car here.

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3