1992 Acura Nsx on 2040-cars

Auto blog

2019 Acura NSX vs. 1991 Acura NSX | Respect your elders

A car that forces the competition to head back to the drawing board does not come around often, especially when that competition happens to be Ferrari. Honda achieved such a feat back in 1991 when the original NSX was set loose in the supercar world. Not only did the NSX smack its contemporaries down in terms of performance and technological prowess, it also forced the Italians to make supercars with some semblance of reliability and manners. Spend only a few moments in an original NSX, and its specialness is palpable. The lack of power steering is acutely noticeable at low speed as I roll over little cracks and dips in the road, while the sticky rubber chucks small rocks up into the wheel wells. A near 360-degree view is at my disposal with the bubble-like canopy, and the ground right in front of the nose is visible from my vantage point. This is what control feels like, and we haven't even gotten to the reverie-inducing VTEC noises getting piped right into our eardrums yet. There are no dials to change the throttle response, no buttons to make the steering artificially heavy, no shift paddles behind the wheel to tell a computer to swap cogs. To my right is a manual shifter that can legitimately be described as perfect. This is a 1991 Acura NSX, and it is glorious. For some of the reasons I've briefly described, and plenty more, this car has reached legend status amongst enthusiasts. In the early 2000s it was a sales disaster, outgunned by pretty much every other supercar in the space. Honda/Acura was only working with a 3.2-liter V6 making 290 horsepower when that car finally met its maker after the 2005 model year. As collectable modern classics, the relatively low power output doesn't seem to bother folks spending close to, and over, six digits on low-mileage examples of these cars. What changed? Well, the passage of time tends to be the biggest factor in these things. Also, there's a new NSX out there, reminding the world that the old one exists. And just like when Acura discontinued the original, the new one is mighty expensive, selling in extremely low numbers, and generally regarded as lesser than other options in its class. This time around it has to deal with standout cars like the 911 GT3, McLaren 570S and Audi R8 V10. But perhaps even worse than that, the new NSX must withstand comparisons to the original. Can you think of any other legendary Japanese car with a similar image problem today? Yeah, the Toyota Supra.

Acura recalling nearly 20k new MDX crossovers over AWD driveshafts

Acura is recalling nearly 20,000 of its 2014 MDX crossovers fitted with all-wheel drive over driveshaft concerns. The affected vehicles were built between May 6, 2013 and October 14, 2013, and have bolts that attach the driveshaft to the transmission that may not have been tightened properly.
Needless to say, an improperly secured driveshaft could lead to a number of problems, including everything from excessive drivetrain noise to full driveshaft detachment, a condition which could result in a loss of power and crash.
There's been no reports of accidents, injuries or deaths relating to the driveshaft issues. Acura will begin notifying all 19,197 owners in question of the recall, and will request that they report in for repairs, which will consist of tightening the driveshaft-attaching bolts. Scroll down for the official bulletin from NHTSA.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.