Tech Package - Navigation - Awd - Non Smoker - Very Clean - Well Maintained on 2040-cars

Auto blog

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.

Acura Integra is reborn, so here's a look at its past

The Acura Integra is officially making its return in 2022. No joke! We’re stoked, too. ItÂ’s a return to the nameplate for Acura — we havenÂ’t seen it grace any cars in the U.S. since 2001. Although the Acura RSX (that was sold here) built 2002-2006 was named the Integra everywhere else but America. Now that we know “Integra” is coming back after 20 years off, though, itÂ’s time to take a stroll through Acura Integra history. That history begins with the launch of Acura as a brand, because the Integra was one of the first two models that Acura came to America with — the Legend was the other. 1986-1989 — First generation The first Integra didnÂ’t see a long model run, as it lasted for just four model years. It was too early to incorporate HondaÂ’s soon-to-come VTEC engine technology, but that doesnÂ’t mean it didnÂ’t come packed with awesome features and tech. Acura actually offered two hatchback options — a three-door and a five-door — and a traditional four-door sedan. The only engine option was a 1.6-liter four-cylinder with a DOHC design that revved out to an impressive 7,000 rpm. It made 113 horsepower and just 99 pound-feet of torque for the first two model years, but a mid-cycle refresh saw output increase to 118 horsepower and 103 pound-feet of torque for the 1988-89 model years. Both a five-speed manual and four-speed automatic were available. It was a sportier car than the Civic at the time, and since Acura is the luxury arm of Honda, it featured a slightly nicer interior. ItÂ’s a rare sight to see first-generation Integras on the roads these days, as rust and time have slowly removed them from AmericaÂ’s highways. No matter, as this Integra kickstarted the sporting and fun-to-drive spirit that would be found in those to come. It was a lightweight, high-revving compact car that helped Acura get off the ground. 1990-1993 — Second Generation Just like the first generation, the second-gen Integra saw just four model years of production. Acura dropped the five-door hatchback offering, instead opting to limit the car to a three-door hatchback and four-door sedan. The styling saw some fairly big changes, as the pop-up headlights were dropped, and the hatchback looked more like a two-door coupe in its silhouette. Performance got a big boost, as Acura upgraded to a 1.8-liter four-cylinder that made 130 horsepower and 121 pound-feet of torque.

Why Acura should build a hybrid Integra successor using NSX tech

Yes, it sounds like a heresy. Yes, the Honda CR-Z was not a good hybrid sports car. Yes, we know the RSX officially replaced the Integra here (but was called the Integra in Japan). But, no, we're not crazy. Well, maybe a little bit. But hear us out. At the moment Acura is a bit of an unfocused mess. Its line-up is thoroughly uninspiring, save for its $200,000 NSX supercar – a great mid-engined supercar with an impressive, performance-oriented hybrid AWD system. And yet few people would draw a line connecting Acura's other SH-AWD hybrids, the RLX Sport Hybrid and MDX Sport Hybrid, to the NSX. The first NSX told the world that Acura built cars with world-class technology and performance, and the Integra carried it to people with normal pocketbooks. Since the new NSX communicates a similar message as its forbearer, so too would a new Integra. Now making an entry-level sports car with hybrid technology is tricky business. As we already established, the Honda CR-Z was a colossal flop. It's balance was all off: heavy, expensive, and not very sporty – and it didn't even get very good fuel economy. However, Honda and Acura can learn from these mistakes. First, to keep costs in check, Acura can borrow from Honda's ever-improving parts bin. It would logical to borrow the excellent Civic coupe platform – something the old Integra did as well. It could also attach the proposed hybrid powertrain to the upcoming Si turbocharged four-cylinder. Some added cost will be unavoidable, since the batteries and motors will have to go somewhere. That will cost some engineering dollars, and inflate the price tag a bit. However, since Acura is a premium brand, it has some wiggle room to bump up the price without losing buyers. Weight is another potential issue this hypothetical hybrid will face, and was one of the chief complaints with the CR-Z. Looking at the RLX and the RLX Sport Hybrid, the hybrid bits weigh about an extra 340 pounds. That's not insignificant, but added to the turbocharged Civic EX-T coupe's 2,900 pound curb weight, you would have a car that would weigh 3,240 pounds. That's comparable to the very fun Mustang EcoBoost. As long as Acura keeps the weight under 3,500 pounds, the brand should have an entertaining coupe on its hands. The final piece of the puzzle is to make sure it isn't compromised. Every bit of hybrid tech in the NSX is there for performance. It helps eliminate turbo lag, and it improves acceleration and handling.