75+pics Clean Carfax 1 Owner~fully Detailed & Serviced~new Tires~we Finance! on 2040-cars

Auto blog

Honda spinning off Acura as stand-alone division in bid to wake up brand

Every major automaker has a different way of relating between its various divisions and brands. At Volkswagen, for example, the individual brands seem to operate with a large degree of autonomy. Under the Renault-Nissan Alliance, the two units share a common chief executive, but little else. The relationship between Honda and its luxury division Acura has always been rather close, but that's all about to change.
American Honda Motor Company has always handled sales and marketing in the North American market for both the Honda and Acura divisions, but new reorganization plans call for the two units to be separated under their own direction. Leading the Acura division will be Michael Accavitti, who moves into the position from his role as Senior Vice President for Auto Operations at American Honda. The Honda division will meanwhile be taken over by the current head of Acura sales, Jeff Conrad.
Both will report to John Mendel, the current executive vice president of the Automobile Sales Division that is being rebranded as the American Honda Auto Division. Unlike rivals Lexus and Infiniti - two brands that Acura beat to the market - Honda barely markets its luxury brand outside of North America. Its overseas presence is felt only in China, though we've yet to receive word on how the reorganization might effect that market - or for that matter, any potential of expanding into others.

Lincoln Aviator vs Cadillac XT6 | How they compare on paper

There have been big, three-row family crossovers for quite a while now, but until recently the luxury market hasn't fully embraced them. Sure, you could literally get one with a third row, but unless you were a kid, chances are the term "dungeon-like" was going to be tossed around. Things are changing now, however, as new and redesigned entries are starting to hit the market. We've recently had a chance to get our first drives of the 2020 Lincoln Aviator and 2020 Cadillac XT6, two all-new three-row crossovers from American luxury brands. We also got a turn behind the wheel of the updated 2020 Volvo XC90. However, since none of our editors have yet to drive to drive them all, we wanted to see how they compare on paper, examining their engine specs and interior dimensions. We also included the 2020 Acura MDX, the original three-row luxury crossover, which continues to sell well despite approaching the end of its current generation. That it offers a hybrid model makes it that much more applicable given the Aviator and XC90 also offer gasoline-electric powertrains, albeit of the plug-in variety. 3 Row Luxury Crossovers Powertrains View 1 Photos Non-hybrid MDX has a 5,000-pound max tow rating. How do their performance and fuel economy compare? This one is absolutely no contest. The 400-horsepower Lincoln blows away its competitors despite having a price tag that's similar to the 310-horsepower Cadillac and in between the XC90's T5 and T6 models. At least the Acura is considerably cheaper. Besides the eye-popping output, the estimated 0-60-mph time of 5.5 seconds (gleaned from the mechanically similar Ford Explorer ST) is appreciably quicker than the others. Now, fuel economy is a bit lower, but the efficiency of Volvo's four-cylinder engines are likely more susceptible to varying due to driver differences. It should also be noted that the Cadillac gets the same combined fuel economy estimate as the Aviator despite having 90 fewer horses and 144 fewer pound-feet of torque. Just one of the ways where the XT6's prospects dim in the presence of its cross-Michigan rival. The Cadillac is also not available as a hybrid model. The others are, but are disparate. The Lincoln Aviator Grand Touring and Volvo XC90 T8 are similar in concept: range-topping models that are as much about adding performance as they are fuel economy. Their hefty price tags certainly reflect that as well.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.