2012 Acura Mdx Sh-awd Tech Sunroof Nav Rear Cam Dvd 34k Texas Direct Auto on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Honda insiders push for Acura NSX Type R sans hybrid tech

With 500 horsepower on tap from a sophisticated hybrid powertrain, there's plenty to love about the new Acura NSX. If the more performance-oriented elements within the Japanese automaker get their way, it could get even better. Speaking with one of the NSX project's chief engineers Nick Robinson at the launch of the new supercar, Autocar reports that there's an effort underway to develop an NSX Type R. Following a much-loved formula, the more extreme variant would pack even more power than the existing version, unburdened by excess weight. A big part of the targeted weight savings would come from ditching some of the heavier components from the hybrid system. The electric motor at the rear could stay to serve as alternator, starter motor, and flywheel. But the electric motors at the front would go, helping to shed a few hundred pounds. Throw in some lightweight materials and we'd be looking at a considerable weight reduction. It could even integrate some active aerodynamic elements that were excluded from the NSX on the road to production. Though the project may still be a ways off from getting the green light, but Robinson and some of his colleagues are working on prototypes ostensibly to make the case. He and his brother James (a powertrain engineer at Honda) will be driving a pair of NSXs at Pikes Peak this year – one that's as close to showroom stock as the regulations will allow, but the other will be closer to what they have in mind for a Type R. It'll ditch the hybrid system and put an electric compressor in its place to eliminate any turbo lag and produce even more power than the existing model. Now if they can only get the go-ahead from the higher-ups at Honda. Related Video: Featured Gallery 2014 Honda NSX Concept-GT News Source: Autocar Green Acura Honda Coupe Hybrid Performance Supercars honda nsx acura nsx type r

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.