2010 Acura Mdx Awd One Owner Bluetooth Back Up Camera on 2040-cars

Auto blog

2019 Acura NSX vs. 1991 Acura NSX | Respect your elders

A car that forces the competition to head back to the drawing board does not come around often, especially when that competition happens to be Ferrari. Honda achieved such a feat back in 1991 when the original NSX was set loose in the supercar world. Not only did the NSX smack its contemporaries down in terms of performance and technological prowess, it also forced the Italians to make supercars with some semblance of reliability and manners. Spend only a few moments in an original NSX, and its specialness is palpable. The lack of power steering is acutely noticeable at low speed as I roll over little cracks and dips in the road, while the sticky rubber chucks small rocks up into the wheel wells. A near 360-degree view is at my disposal with the bubble-like canopy, and the ground right in front of the nose is visible from my vantage point. This is what control feels like, and we haven't even gotten to the reverie-inducing VTEC noises getting piped right into our eardrums yet. There are no dials to change the throttle response, no buttons to make the steering artificially heavy, no shift paddles behind the wheel to tell a computer to swap cogs. To my right is a manual shifter that can legitimately be described as perfect. This is a 1991 Acura NSX, and it is glorious. For some of the reasons I've briefly described, and plenty more, this car has reached legend status amongst enthusiasts. In the early 2000s it was a sales disaster, outgunned by pretty much every other supercar in the space. Honda/Acura was only working with a 3.2-liter V6 making 290 horsepower when that car finally met its maker after the 2005 model year. As collectable modern classics, the relatively low power output doesn't seem to bother folks spending close to, and over, six digits on low-mileage examples of these cars. What changed? Well, the passage of time tends to be the biggest factor in these things. Also, there's a new NSX out there, reminding the world that the old one exists. And just like when Acura discontinued the original, the new one is mighty expensive, selling in extremely low numbers, and generally regarded as lesser than other options in its class. This time around it has to deal with standout cars like the 911 GT3, McLaren 570S and Audi R8 V10. But perhaps even worse than that, the new NSX must withstand comparisons to the original. Can you think of any other legendary Japanese car with a similar image problem today? Yeah, the Toyota Supra.

Acura spotlights NSX pace car at Pikes Peak

You can't just have any old street car setting the pace at the Pikes Peak International Hill Climb, can you? Of course not. For that task, you'd need a supercar with exceptionally high performance capabilities. Something like the new Acura NSX, for example. Fortunately that's just what the organizers of the annual Race to the Clouds selected to serve as official pace car this year. Honda's new hybrid supercar, set to be built in Ohio, donned a unique livery, a senior PR rep behind the wheel, and a smattering of GoPro cameras to speed up the 14,110-foot mountain. Naturally the twin-turbo V6 engine, nine-speed, dual-clutch transmission, and three-motor Sport Hybrid Super Handling All-Wheel Drive (SH-AWD) system formed an integral part of the package as well, even if its output hasn't been officially released more specifically than the "over 550 horsepower" we've been told to expect. The Japanese automaker also placed another couple dozen cameras along the 12.4-mile route and its 156 turns. Which is a good thing, considering that most of us weren't there in Colorado to see it make its run up the mountain, and nobody was there at each corner as it passed – except, of course, for the driver, Sage Marie. The rest of us will want to check out the minute-long clip Acura has released to see the NSX gun for the sky.

Acura confirms more 2016 NSX details

Acura served up a slew of engineering details about the soon-to-launch 2016 NSX. Fittingly, they were explained at a dinner at the SAE International World Congress in Detroit, where morsels about the new Acura supercar were likely gobbled up quicker than the main course. Among the highlights: The NSX will mark Acura's first use of a multimaterial space frame, and it includes high-strength steel and aluminum. This will allow the NSX to hit its weight targets, while maintaining rigidity. The NSX uses a so-called "ablation" technology, which allows the ultra-rigid castings to be used within the car's crush zones. For more details on this, scroll through the press blast below. As expected, the NSX will pack a twin-turbo V6 engine, and Acura confirmed it will displace 3.5 liters. The unit will be mounted amidships and team with hybrid components to increase performance and efficiency. The supercar also features the most advanced evolution of Acura's Super Handling All-Wheel-Drive system, and it's capable of distributing more torque than any other setup the brand has used. The NSX has 10 air-cooled heat exchangers that will cool the powertrain, and the V6 alone will have three radiators. There are also twin intercoolers in the side air intakes that further cool the system. The next generation of the NSX was unveiled in January at the Detroit Auto Show, and production launches this fall in Ohio. Related Video: New Technical Details of the Next Generation Acura NSX Revealed at SAE 2015 World Congress and Exhibition . DETROIT, April 23, 2015 – In advance of the market launch of the highly anticipated next generation Acura NSX, the engineers leading the supercar's development shared new technical details and design strategies with the automotive engineering community at the April 22nd SAE Detroit Section dinner, held in conjunction with the SAE 2015 World Congress and Exhibition. Additional information about the team's efforts to achieve a true "New Sports Experience" included details of the NSX's world's first body construction process that helped create a multi-material space frame resulting in class-leading body rigidity, the advanced total airflow management system and an update on NSX's power unit specifications. Ted Klaus, chief engineer and global development leader of the new NSX, introduced key powertrain, body and dynamic performance engineers who shared new product and technical details in their related areas of the development.