2008 Acura Mdx Base Sport Utility 4-door 3.7l on 2040-cars

Auto blog

Daily Driver: 2015 Acura TLX

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Acura TLX, reviewed by Seyth Miersma. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. Show full video transcript text Hey all, this is Seyth with Autoblog and I'm here in the 2015 Acura TLX. Right off the bat I can tell that the TLX doesn't feel anything like as sporting a sedan as the TL it replaced, at least not in the versions that I last drove, which admittedly were TL's with V6 power and the SH all wheel drive. This TLX has got a 2.4-liter, four-cylinder engine, it's making 206 horsepower, and 182 pound-feet of torque, and it is connected up to a eight-speed, dual-clutch transmission. As you can tell by the power output this isn't an impressively fast car. It weighs about 3,500 pounds so it's lugging around some weight. At the same time the eight-speed transmission is really responsive especially as you go through the selectable gear programs, you can make the throttle response pretty good. It is a throttle by wire as well and I haven't noticed any weirdness there, it feels very linear, and like I said, when I turned the system into the sport plus mode the gas pedal becomes really responsive. The exhaust note is muted, you really have to get up over 5,000 rpm before you start feeling like the engine is really pushing you. One of the things that struck me first about this Acura when I got in it was how quiet it was at speed. I feel like in the luxury segment, Acuras have historically done a little bit better for being sportier versions of cars in their segment and not necessarily more refined, but that seems to have been changing a lot on the last few generations of Acura. What it lacks in athletic ability it makes up for in composure. I'm on a pretty good right now, there are plenty of bad ones around where I live so this suspension soaks up a lot of the impacts and it dampens the sound of them as well too. Acura is clearly going after a much more mainstream customer these days and I think a car like this could be very attractive, more attractive than ever for a shopper of something like a Lexus ES. One feature I did play around with was Acura's active lane keep assist which works actually by moving the steering wheel to a degree to keep you centered in your lane if your hands are off the wheel.

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video:

2019 Acura RDX infotainment first impressions | A first step into the touch pad world

One of the greatest design challenges in the modern automotive industry is an infotainment system that provides loads of capabilities, but is also easy-to-use and not overly distracting. Touch screens have been leading the way as the favored option, but Acura is trying a new design that relies on a touch pad with some unique tweaks to separate it from similar systems, such as those seen in competing Lexus models. And we got to try it out in the first production application, the 2019 Acura RDX compact crossover. The key feature of the touch pad is its one-to-one position functionality. What that means is that, if you have a grid of function buttons on the screen, tapping on, say, the upper left corner of the pad will highlight the button in the same area on the screen. And if you were to take your finger off the pad and tap in the opposite corner, that section of the screen would immediately be highlighted. You don't have to slide your finger across the pad to reach selections if you don't want to, and you don't have to slide back from the last function you highlighted. It basically does away with the need to move a cursor around like you would on a laptop with its mouse pad. In practice, it's a little odd to use at first because we mentally connect using a touch pad with the traditional cursor interface of the laptops we use day in and day out. As such, we forgot that we didn't have to scan the screen for the cursor every time we needed to select something. But once we remembered we could skip that, we found it quick and easy to drop our finger down and slide to our preferred function quickly. We could occasionally even pick something on the corners without having to slide at all. This is partly because Acura designed the interface to work with this pad. A representative from Acura's R&D center explained that they tried to put common functions on those corners because they're easy to reach without looking or thinking much. Another bonus to this system is that you don't immediately go to the function the second you press the pad. Instead, the feature is highlighted and still needs a physical click to enter. This is enormously helpful, since it virtually eliminates the chance of going to the wrong selection because you hit a bump or just got lazy with finger placement. Instead, you can get your finger in the right spot and then commit with a button press.