2008 Acura Mdx Awd Technology Package Super Clean on 2040-cars

Auto blog

Acura NSX ScienceofSpeed Dream Project brings another wing to SEMA

Acura rolled into SEMA last year with its non-hybrid NSX GT3 race car, that FIA spec-series competitor pulled to Vegas on a trailer behind a GT3-themed Acura MDX. Sticking with the GT3 theme this year but going road-legal, Acura worked with Arizona-based ScienceofSpeed on a GT3 package that NSX owners can put in driveways. The result is the lower, more powerful, more wing-y NSX "Dream Project." Liquid-cooled injecting for the twin-turbo boosts output, adding 37 horsepower for a total of 610, and another 31 pound-feet of torque to register 507. A lightweight steel exhaust sheds 16 pounds and bestows those magnified numbers with magnified bass. A custom suspension drops the coupe by a little more than an inch, a custom iLIFT suspension add-on automatically raises the front axle two inches if the NSX detects a hurdle. The ScienceofSpeed aero kit includes all you'd expect from the alphanumeric "GT3:" front strakes, wider rocker panels, larger rear diffuser, a rear wing, gold powdercoated carbon ceramic Brembo brakes, and wider Pirelli Trofeo R tires wrapped around Advan GT forged wheels. Drench the package in two-tone Andaro Nouvelle Blue Pearl and gloss black roof, and the NSX Dream Project's ready to be driven from climate-controlled garage, to parking-lot car show, back to climate-controlled garage. If the owner decides to test a limit or two, Recaro Pole Position seats and a gaugeART OLED display will keep him locked in and informed. Related Video:

There was once a Honda Civic named the Honda Integra

So it turns out there was a Honda Integra that was actually a Honda Civic. This as opposed to the Honda Integra we already knew about that was just like our Acura Integra but with Honda badges sold in different markets. We noticed the oddity while crawling about used car listings (as one is wont to do). A sedan popped up that looked suspiciously like a mid-90s Honda Civic, but there was a shiny Integra badge on the back of it. Surely, this must be somebody’s idea of being funny, right? Wrong. The Honda Integra SJ exists, and itÂ’s essentially a rebadged Honda Civic Ferio. Or "Civic Sedan" as we knew it here. In other words, that means Honda sold two Honda Integras at the same time. One of them was the Integra that we all think of upon hearing the Integra name. The other was just a Civic Ferio that was half-prettied up to increase its appeal. After all, the Integra name was luxury. Maybe you already knew all of this, but the lack of definitive information online and presence of this car for sale prompted us to do a little research. In case you were wondering, SJ stands for Sedan Joyful, so this carÂ’s full name is the Honda Integra Sedan Joyful. It was sold as such from 1996-2001 in Japan. Its mini Wikipedia entry indicates that Honda created the SJ to bring a formal sedan to the Integra range. ThatÂ’s a bit weird, though, as there was literally an Integra four-sedan at the time. You could even get it as the hot GS-R version in the United States. Japanese buyers were even luckier, as Honda offered a sedan version of the Integra Type R there. Since the Integra SJ was a rebadged Civic Ferio, it came with the same equipment and engine. The 1.5-liter D15B four-cylinder engine was being used in the Ferio at this time, so thatÂ’s what the Integra SJ was rocking. ItÂ’s one of HondaÂ’s SOHC VTEC offerings, and it made a very respectable 128 horsepower. The D15B wasnÂ’t as potent as an engine like the B16A2 found in the 1999-2000 Honda Civic Si sold here that put out 160 horses, but it was also down one camshaft. Only the intake valves are affected by the cam here, which results in less power than the DOHC VTEC engines. All that said, the engine still revved to 7,200 rpm, and its power is respectable for the size of car.  ThereÂ’s a third name for the Civic Ferio/Integra SJ, as well. If you go to Thailand, you may come across the Isuzu Vertex, which is yet another rebadged Civic Ferio.

2019 Acura RDX compact crossover goes into production in Ohio

Acura has kicked off production of the all-new 2019 RDX, capping a $54 million investment in new technologies and processes at its plant in East Liberty, Ohio, where the compact crossover will be built. It goes on sale starting in June, though prices are yet to be announced. The RDX is Acura's best-selling model, and the 2019 model was designed and developed in the U.S. for the first time. Acura says it's the first in a new generation of vehicles based on its Precision Crafted Performance brand direction, which is based on the Precision Concept and Precision Cockpit concepts from 2016. Honda's investment in its East Liberty Auto Plant brought two firsts for a mass-produced Acura: a new roller hemming process for the crossover's large panoramic sliding moonroof and the use of high-performance structural adhesives to increase body rigidity. It also gets a new multi-layer paint system to handle the new premium exterior color options. The RDX is powered by a 2.0-liter four-cylinder VTEC Turbo engine built in nearby Anna, Ohio. It makes 272 horsepower and 280 pound-feet of torque and is paired with Acura's 10-speed automatic, made at the company's transmission plant in Tallapoosa, Ga. Also notable is the "Super Handling All-Wheel Drive" system, which shifts more power to the rear axle to improve handling. It also gets a new, lightweight Acura-only platform that stiffens the body and adds more interior room and cargo space. Acura is also debuting a new True Touchpad Interface in the RDX that offers a unique one-to-one position with the 10.2-inch center display screen that works a little differently than a traditional cursor interface. You can read our review of it here. Related Video: Featured Gallery 2019 Acura RDX production Image Credit: Acura Plants/Manufacturing Acura Crossover acura rdx