Find or Sell Used Cars, Trucks, and SUVs in USA

?must See 2010 /w Technology Pak~xen/nav/cam/xm/dvd/mp3~sh Awd Premium Plus 4x4? on 2040-cars

US $23,500.00
Year:2010 Mileage:100420
Location:

Advertising:

Auto blog

Acura recalling nearly 20k new MDX crossovers over AWD driveshafts

Fri, 13 Dec 2013

Acura is recalling nearly 20,000 of its 2014 MDX crossovers fitted with all-wheel drive over driveshaft concerns. The affected vehicles were built between May 6, 2013 and October 14, 2013, and have bolts that attach the driveshaft to the transmission that may not have been tightened properly.
Needless to say, an improperly secured driveshaft could lead to a number of problems, including everything from excessive drivetrain noise to full driveshaft detachment, a condition which could result in a loss of power and crash.
There's been no reports of accidents, injuries or deaths relating to the driveshaft issues. Acura will begin notifying all 19,197 owners in question of the recall, and will request that they report in for repairs, which will consist of tightening the driveshaft-attaching bolts. Scroll down for the official bulletin from NHTSA.

A smoother operator | 2017 Acura MDX Sport Hybrid First Drive

Tue, Apr 4 2017

There's a lot to unpack when trying to understand the 2017 Acura MDX Sport Hybrid. Acura is billing it as a three-row crossover infused with NSX technology via a sport-oriented hybrid drivetrain. So it's a hybrid crossover, sure. But it doesn't comport itself like a traditional crossover, nor is it a conventional hybrid. What it is, underneath, is an intentionally subtle blend of impressive technologies doing their best to appear transparent – and it's too subtle, I fear, to be appreciated by those who'd like it the most. This is a lot of foreshadowing, but if you're not familiar with the MDX Sport Hybrid's powertrain, let's fill you in. The MDX Sport Hybrid uses the same basic system as the 2014 RLX Sport Hybrid, with some newer NSX battery tech sprinkled in, packaged neatly into the refreshed third-generation MDX platform. The system improves handling and efficiency – but more important, it smoothes out the harshness of shifts and engine stop-starts. We do need to examine the system in some detail to understand how all this affects the MDX as a whole, so let's go toe to tail. Up front is a transversely-mounted 3.0-liter V6 making 257 horsepower and 218 pound-feet of torque, as well as featuring i-VTEC and cylinder deactivation. It's slightly smaller than the 3.5-liter V6 found in the conventional MDX and many other Honda and Acura products. Attached alongside is a Honda-produced 7-speed dual-clutch transmission that has a 47 hp, 109 lb-ft electric motor-generator stuffed inside. Amidships are the battery pack and the electronics to control it, and stretching aft from there are large cables feeding power to a pair of electric motors that reside in single housing, one for each wheel. Together, they produce electron witchcraft and torque-delivery wizardry – and add 72 hp and 108 lb-ft of torque to the mix. The total system output is 321 hp and 289 lb-ft of torque – a gain of 31 hp and 22 lb-ft over the conventional MDX SH-AWD. Beyond the raw numbers, there's the remarkable subjective benefit of the Sport Hybrid's drivetrain. Engine start-stop events are quiet and smooth, nearly imperceptible when under way – in stark contrast to the too-perceptible shudder of competing engines kicking on. The electric motors (mainly the one residing in the transmission) add in power to make up for the lull during a shift, making shifts up or down seamless, as well as providing regenerative capacity.

Acura replaces chief Accavitti with designer Ikeda

Tue, Jul 28 2015

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.