Acura Integra Ls 5 Speed on 2040-cars

Auto blog

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.

530,000 Hondas, Acuras under expanded NHTSA investigation for steering problem

Earlier this year, the National Highway Traffic Safety Administration opened an investigation into the 2022 and 2023 Honda Civic. The agency had received 145 complaints from owners stating that the car suddenly exhibited “sticky steering” and increased steering effort. WeÂ’re now learning that the investigation is expanding to include hundreds of thousands more cars. The original probe included around 238,000 Civics, but the NHTSAÂ’s latest report, issued Friday, noted that the investigation is expanding to include more than 530,000 Hondas and Acura vehicles. The 2022 and 2023 Honda Civic, 2023 Honda CR-V, and 2023 Acura Integra are affected. A drastic increase in complaints drove the expansion, as the NHTSA said it had received 1,300 reports and was aware of at least 14 crashes related to the problem. An alarming 11 of those crashes involved a roadway departure due to loss of steering control. Two of them came after the driver allegedly overcorrected, and there are three known injuries from the crashes. NHTSAÂ’s report found that the problem happened primarily in the winter months and after the car had been driven in a straight line for an extended period to warm up the vehicle and gear. Though alarming, itÂ’s worth noting that this investigation has not yet reached the recall stage. Honda acknowledged the problem, noting that it was a manufacturing issue for the steering gear unit. The manufacturing process created conditions that could cause greater internal stress, which can wear and deform the gears inside the steering component. The NHTSA also found that the factory did not guarantee consistent lubrication throughout the gear, which could be the cause of the temporary increase in steering effort. The automaker directed its dealers to replace the electronic power steering gearbox to correct a manufacturing defect, but NHTSA will continue its process, moving to an engineering analysis. If that study finds a defect, it could request a recall. Government/Legal Acura Honda Safety

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3