2000 Acura Integra 3dr Sport Coupe Gs-r Manual on 2040-cars

Auto blog

Honda Expands Takata Airbag Recall To 5.4M Units In The US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

2015 Acura TLX production gets underway in Ohio

It's been three months since Acura unveiled the supposedly production-ready TLX sedan at the New York Auto Show, but dealers have yet to receive any units to sell. That's because, as we reported back in April, production of the TLX was pushed back. We're glad to report now, however, that production has commenced at the Marysville Auto Plant in Ohio.
The Honda facility in Marysville, just south of Columbus, also produces the Accord sedan and coupe for local consumption and export. With over 30 years since its founding, the factory has previously handled production of the Acura TL and RDX as well as the company's Gold Wing motorcycles.
The Marysville Auto Plant is one of many facilities which Honda operates in Ohio. Among the others, you'll also find the East Liberty assembly plant that handles the Acura RDX as well as the Honda Crosstour and CR-V, an engine plant in Anna, a transmission factory in Russells Point, several R&D centers, component manufacturers and a new Performance Manufacturing Center being built to handle the coming NSX sports car in Marysville.

2022 Acura MDX production officially begins in Ohio for the revamped crossover

Production for the 2022 Acura MDX is officially underway in East Liberty, Ohio. We got to see the MDX Proto late last year, and the final production MDX was revealed a couple months after it in December. Now, Acura is screwing them together. Acura says the new MDX should begin to hit dealerships on February 2. It feels mighty early for a 2022 model year vehicle to already be hitting dealers, but that’s just how Acura is handling it. Only the standard MDX with its carryover 3.5-liter V6 (290 horsepower and 267 pound-feet of torque) will be available at first. WeÂ’ll have to wait until summer for the Type S and its 3.0-liter turbocharged V6 (355 horsepower and 354 pound-feet of torque) to come online, similar to the TLX Type S. Just like the TLX, the MDX is riding on a new platform this year. ItÂ’s designed to be much more athletic and luxurious than before. WeÂ’ll be getting our first turn behind the wheel soon, so youÂ’ll want to come back for the first drive to see how Acura executed. The TLXÂ’s chassis and handling improvements give us high hopes for the MDX to see similar gains in refinement and agility. There is one first for Acura when it comes to the physical production process of the MDX. ItÂ’s the first Acura to use the plantÂ’s new 5,000-ton stamping press. Acura says this new machine allows for “sharper sculpting of the hood and body panels while forming steel and increased amounts of aluminum.”  For all the details we currently know about the MDX, check out our full reveal post here. Related video: