2013 Volvo Xc60 Power Glass Moonroof/leatherseats/roof Rails/spoiler/alloywheels on 2040-cars

Auto blog

2015 Volvo XC90 mule spotted testing in the snow

The Volvo XC90 was a big step for the Swedish automaker in 2003, but the midsize crossover has changed very little since its introduction. All that's about to change as Volvo starts its initial development on the 2015 XC90, which we see for the first time in these spy shots showing a cobbled-together XC70.
Like the current XC90, the next-generation model will be both longer and wider than the XC70 - judging by the modifications made to this mule's body - which will continue to allow Volvo's flagship crossover and provide three rows of seating. The next XC90 will ride on a new platform that will eventually make up around two-thirds of all Volvo sales, called the Scalable Product Architecture (SPA).
Our shooter managed to find out the registration number for this mule, which indicated that it was powered by a five-cylinder diesel, but we expect the automaker to start stepping away from its current powertrains with a big push toward smaller engines courtesy of the new Volvo Engine Architecture (VEA). Rumor has it that the future engine lineup for the XC90 will rely heavily on turbocharged four-cylinder engines and eight-speed automatic transmissions, which will likely eliminate or lessen some of the current mills available like a straight-six or V8.

How Volvo is going greener, according to sustainability chief Henrik Green

STOCKHOLM — This week, Volvo unveiled its new flagship electric vehicle, the EX90 three-row SUV. ItÂ’s not just a look at a product weÂ’ll see come to market in 2024, but a glimpse at the approach Volvo is taking to become more sustainable as it aims to go all-electric by 2030 and carbon-neutral by 2040. After the unveiling of the EX90, we had the opportunity to speak with Henrik Green, VolvoÂ’s advanced technology and sustainability officer, as part of a roundtable discussion about the brandÂ’s climate strategy moving forward. Part of the strategy is accountability and transparency. In an industry where sensitive materials like cobalt and lithium can be environmentally, socially and geopolitically problematic, traceability is paramount. Volvo will use blockchain technology — the same sort of secure ledger tech that makes cryptocurrency possible — to trace cobalt, lithium and nickel from their very origins in the earth all the way to the EX90s that roll off the factory floor. Green said he expects that traceability to expand to more materials, but those three are what Volvo can commit to today. Green also predicts a time when “you as a consumer should be able to see, ‘Here, in my app, this is the car I bought, this is where my nickel came from thatÂ’s in my car.’” While step one is improving transparency, “the next step is — this is much more long-term — how can we affect the industry to source from the most sustainable sources as possible?” And that leads us to recycling. A circular economy is the goal, where raw materials are used minimally, replaced by materials sourced from old cars, batteries, electronics and the like. But that depends on the first generations of electric cars fulfilling their lifecycles before they can be recycled. And obviously the better the longevity of products like batteries, the longer this will take. “Unfortunately, it has this built-in time lag of putting batteries out there that live until they need to be replaced, and then we will get the material back.” Partners are beginning to scout for those recyclable materials from sources like non-automotive electronics, “but the massive volume of car batteries will not be accessible until these cars have been on the road 10, 15 or more years.” But recyclability is one of the main factors Volvo looks for when partnering with companies like Northvolt, with whom Volvo is building a factory and R&D center in Gothenburg, Sweden.

Hyundai Sonata PHEV may be a game (and mind) changer

If you really, really want to consume volts instead of fuel on your way to work, school or shopping, you currently have just three options: pure EV, hydrogen fuel cell, or plug-in hybrid EV. Much as we love them, we all know the disadvantages of BEVs: high prices due to high battery cost (even though subsidized by their makers), limited range and long recharges. Yes, I know: six-figure (giant-battery) Teslas can deliver a couple hundred miles and Supercharge to ~80 percent in 10 minutes. But few of us can afford one of those, Tesla's high-voltage chargers are hardly as plentiful as gas stations, and even 10 minutes is a meaningful chunk out of a busy day. Also, good luck finding a Tesla dealership to fix whatever goes wrong (other than downloadable software updates) when it inevitably does. There still aren't any. Even more expensive, still rare as honest politicians, and much more challenging to refuel are FCEVs. You can lease one from Honda or Hyundai, and maybe soon Toyota, provided you live in Southern California and have ample disposable income. But you'd best limit your driving to within 100 miles or so of the small (but growing) number of hydrogen fueling stations in that state if you don't want to complete your trip on the back of a flatbed. That leaves PHEVs as the only reasonably affordable, practical choice. Yes, you can operate a conventional parallel hybrid in EV mode...for a mile or so at creep-along speeds. But if your mission is getting to work, school or the mall (and maybe back) most days without burning any fuel – while basking in the security of having a range-extender in reserve when you need it – your choices are extended-range EVs. That means the Chevrolet Volt, Cadillac ELR or a BMW i3 with the optional range-extender engine, and plug-in parallel hybrids. Regular readers know that, except for their high prices, I'm partial to EREVs. They are series hybrids whose small, fuel-efficient engines don't even start (except in certain rare, extreme conditions) until their batteries are spent. That means you can drive 30-40 (Volt, ELR) or 70-80 miles (i3) without consuming a drop of fuel. And until now, I've been fairly skeptical of plug-in versions of conventional parallel hybrids. Why?