One 1 Owner Trade-in 19 In Alloy Daytime Running Lights Mp3 Fog Red Cloth 6 Cd on 2040-cars

Auto blog

Toyota's HaMo urban mobility carsharing program comes to France

We're guessing no one's nuts enough to try to take one of Toyota's three-wheeled leaning electric i-Road vehicles up into the French Alps. Still, the town of Grenoble, France, which sits at the foot of the mountains, has received 35 of those vehicles as part of a carsharing pilot program. Toyota's thrown in 35 four-wheel Auto Body COMS vehicles into the program as well. Grenoble, which is about 200 miles north of Marseille, was presumably chosen because of existing carsharing programs run by Cite-lib. This program, dubbed "Cite lib by Ha:mo," goes a little more futuristic, though, as it's part of what Toyota calls its "Ha:mo" plan (Ha:mo is short for "harmonious mobility"). The program will run for three years and includes 27 charging stations near bus lines and train stations. The public will be charged anywhere from three to 19 euros ($3.80 to $24.50 US) to use the vehicles for between 15 minutes and four hours. The good news is that drivers can pick up the vehicles in one location and drop them off in another. Toyota started testing the i-Road vehicles in Toyota City, Japan, this past March. The trike is about three feet wide and has a top speed of 28 miles per hour. Check out Toyota's press release below and read AutoblogGreen's "First Drive" impressions of the i-Road here. "Cite lib by Ha:mo", a New Type of Urban Mobility Based on Ultra-Compact Electric Vehicles Connected to Public Transport, Launches in Grenoble, France This innovative car-sharing service aims to prepare the City and agglomeration of Grenoble for electric mobility within a comprehensive multi-modal mobility plan. The three-year trial project brings together the competencies and services of five partners: the City of Grenoble, the Metro Area, French electricity company EDF and its affiliate Sodetrel, Toyota, and Cite lib, the local car-sharing operator. 35 three-wheel Toyota i-ROAD and 35 four-wheel Toyota Auto Body COMS will be available for short city trips in 27 charging stations installed and operated by Sodetrel - including for one-way trips from one station to another. A total of 120 charging points for the project and 41 for other plug-in vehicles will be added to the city's transport infrastructure. A simple pricing plan dubbed "3, 2, 1 euros" for respectively the first, second and third 15-minute increments will be proposed to Grenoble citizens.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.