2011 Toyota Tundra Sr5 Crew Cab Pickup 4-door 5.7l on 2040-cars

Auto blog

Toyota FCV rallies to the hydrogen cause as zero car

It's been two decades since Toyota dominated the World Rally Championship with its Celica Turbo 4WD. But this past weekend, Toyota hit the rally stage in a very different vehicle.
That, as you can see, is the Japanese automaker's Fuel Cell Vehicle (FCV), which is still in its prototype phase. We're still at least half a year away from seeing the FCV in production trim, but the model has already been pressed into duty as the "zero car" at the Shinshiro Rally, the last round of the Japanese Rally Championship.
The zero car, for those unfamiliar, is to rally what a pace or safety car is to circuit racing, driving the rally stage to check for signs of trouble before the competitors put their feet to the floor, so it's not as if the FCV needed extensive modifications. From the looks of things, it just needed some jazzy stripes, mud flaps, probably different rolling stock and an interior with racing buckets and harnesses, roll cage, radio equipment and maybe a bit more ground clearance.

Toyota recalls power window switches for 6.5 million vehicles [UPDATE]

UPDATE: There was one incident of someone in the US getting a burn to the hand from this issue Toyota spokesperson Cindy Knight tells Autoblog that. "We have 11 reports where part of the door trim and/or switch was burnt," she said. The company isn't aware of any crashes from the problem, though. Because of a potential short circuit in the driver's side power window switch, Toyota is recalling 6.5 million vehicles worldwide, Reuters reports. Of those, the automaker says around 2 million are in the US. The affected models here are: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD According to Toyota, the switch might not have received adequate lubricant grease during manufacturing, and over time this could lead to a short circuit. In a worst-case scenario, the part might even overheat, melt and cause a fire. As a fix, dealers will inspect the component on these vehicles and apply heat-resistant grease to it, and any broken examples will have an internal circuit board replaced. Toyota already issued one recall for this problem in 2012 when it had to repair 7.5 million vehicles globally from the 2007-2009 model years, including 2.5 million in the US. These latest models had the grease applied in a different way. Related Video: Toyota Recalls Certain Vehicles for Power Window Master Switch October 21, 2015 TORRANCE, Calif., Oct. 20, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 2,000,000 vehicles related to the driver's side Power Window Master Switch. The involved vehicles include certain: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD The Power Window Master Switch in the involved vehicles may have been manufactured with insufficient lubricant grease. If not enough grease is applied, under certain conditions the switch may develop a short circuit that can cause the switch assembly to overheat and melt. A melting switch can produce smoke and potentially lead to a fire. Toyota previously recalled certain 2007-2009 model year vehicles for a similar condition.

Toyota breaks ground on new Texas HQ

Automakers are on the move in America: Cadillac is shifting from Detroit to New York, Mercedes is moving its US headquarters from New Jersey to Atlanta, and Toyota is relocating its North American operations from locations around the country to a new facility outside of Dallas in northern Texas. That process started yesterday when the Japanese automaker broke ground at the new facility. Toyota used a 2015 Tundra TRD Pro Series pickup to officially break ground at the intersection of Headquarters Drive and Palomino Crossing in Plano, TX, with the city's mayor joining Toyota Motor North America CEO Jim Lentz and a crowd of 100 dignitaries. Toyota announced the relocation back in April, and in the months since has purchased the property, hired a developer, architect and project manager, and filed preliminary plans with city hall. The site is set to be ready late in 2016 or early 2017, moving operations from California, Kentucky and New York. Other facilities like the one in Ann Arbor, MI, will not be affected by the relocation. Related Video: TOYOTA PLOWS FORWARD IN PLANO, BREAKS GROUND ON NEW HEADQUARTERS PLANO, TEXAS, JAN. 20, 2015 – A V-8 engine growls, and the earth moves. With the roar of a 2015 TRD Pro Series Tundra, Toyota today formally broke ground on its new North American headquarters at the intersection of Headquarters Drive and Palomino Crossing in Plano, Texas. The Tundra took center stage, bulldozing the first soil on the site of Toyota's new campus in a manner that can only be described as not your traditional groundbreaking ceremony. "The support and encouragement we've received from the community, civic leaders, business partners and nearby corporations has been nothing short of tremendous," said Jim Lentz, Toyota Motor North America chief executive officer. "Our goal is to build an environmentally-sustainable campus that our new neighbors will welcome and our team members and associates will be proud to call home." Toyota also unveiled an installation during the ceremony: the word "TOYOTA" in large letters, standing 10 feet tall and 64 feet wide. Inside each letter are native Texan Yaupon Holly trees, which represent "wish" trees, a Japanese cultural tradition. Students from the Plano ISD Academy High School and community participants contributed to the event by adding handwritten notes to the trees representing their wishes, dreams, hopes and inspirations.