2012 Toyota Tacoma Base Crew Cab Pickup 4-door 4.0l on 2040-cars

Auto blog

European car sales up 8% in February

Three weeks ago an analyst increased projections for European car sales this year, expecting them to climb three percent compared to last year instead of 2.7 percent. That number is a postive sign after years of hard times but it turns out February was especially good, overall European sales climbing eight percent on a wave of southern European recovery and discounts - and this comes after five months of gains including January's 7.2-percent jump over the year before.
The only country of Europe's five largest markets to post a decline was France, just as it did in January, Germany, the UK and Italy posting solid double-digit numbers, Spain rocking the charts with an 18-percent increase because of a government program to encourage trade-ins.
The only brand to miss the wave was Volkswagen, dropping 0.8 percent as it watched the double-digit growth at sister brands Audi, Seat and Skoda lift the Volkswagen Group sales up by seven-percent. Peugeot overcame flat sales at Citroën to improve the group by 3.5 percent, BMW and the Mercedes-Benz/Smart combo rose by four percent, the Fiat group jumped 5.8 percent, Ford was up 11 percent, the Renault Group 11.5 percent, General Motors 12 percent and the Toyota clan by 14 percent.

Toyota Camry Hybrid SE adds a dash of limited-edition sport

For drivers who want to benefit from the increased efficiency of a hybrid sedan but who don't want to look like they'd rather be hugging trees, Toyota has just announced its 2014.5 Camry Hybrid SE Limited Edition.
The SE LTD combines the exterior bits and pieces that make the SE look sportier than other Camry models with the 2.5-liter, four-cylinder engine, electric motor and nickel metal hydride battery pack of the Camry Hybrid. That means the Hybrid SE offers up 200 combined system horsepower to the front wheels, and we'd expect it to be rated at the same 40 miles per gallon city and 38 highway of the Camry XLE Hybrid.
Only 5,000 units will be produced between February and June of 2014, with an asking price of $27,845, which is about $700 more expensive than the base Camry Hybrid LE or $2,620 less than the Hybrid XLE that Toyota says shares a similar level of equipment. Sounds like a fair shake to us. Scroll down below for the complete press release.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.