2010 Toyota Tacoma Prerunner Double Cab V6 Damaged Salvage Runs! Cooling Good!! on 2040-cars

Auto blog

Toyota recalls pre-collision system on Avalon and ES models

Toyota is recalling 31,000 US examples of the 2013-2015 Avalon, Avalon Hybrid, Lexus ES350, and ES 300h because the Pre-Collision System could potentially cause an accident. According to the company, it's possible for the safety aid to misidentify a steel joint or plate in the road as a hazard and apply the brakes. The sudden, unexpected activation could lead to a crash. Toyota spokesperson Cindy Knight told Autoblog that the company has reports of two accidents in the US related to this issue, and there are also two alleged injuries. The company has no reports of fatalities. Toyota is taking a serious approach to deal with this problem. First, the company plans to disable the system on these sedans. Once the parts are available, dealers will replace the system with improved components. The company doesn't yet know when these repairs will begin, but owners should receive notification of the recall in November, according to Knight. Toyota isn't alone in needing to tweak safety equipment. Ford faced a similar issue when the company recalled 36,857 examples of the 2015 F-150 because passing a large, reflective semi could inadvertently activate the collision warning system. An update for the adaptive cruise control module software fixed the problem. TOYOTA RECALLS CERTAIN AVALON AND LEXUS ES VEHICLES TORRANCE, Calif., November 3, 2015 – Toyota Motor Sales, USA, Inc. today announced that it is conducting a safety recall of approximately 31,000 Model Year 2013-2015 Avalon, Avalon Hybrid, Lexus ES350 and ES300h sedans. In the involved vehicles, under certain situations, the PCS (Pre-Collision System) could interpret a steel joint or plate in the roadway as an object that triggers PCS activation. If this occurs, the PCS warning buzzer sounds and the system may apply the service brake automatically. Unexpected braking could increase the risk of a crash. For all involved vehicles, the PCS function will be disabled as an interim remedy. As the permanent remedy, Toyota dealers will replace PCS components with improved ones. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-to-date Safety Recall information on Toyota, Lexus or Scion vehicles, customers should check their vehicle's status by visiting toyota.com/recall and entering the Vehicle Identification Number (VIN). Safety Recall inquiry by individual VIN is also available at the NHTSA site: safercar.gov/vin.

Who sold the most small/midsize pickups in 2012? PickupTrucks.com investigates that, too

PickupTrucks.com has taken another look at the sales of its favorite vehicle bodystyle as part of an ongoing series. According to registration data from R.L. Polk, the Toyota Tacoma easily took the crown as America's best-selling mid-sized pickup, with 133,477 units rolling into new homes in 2012. For comparison, the second-place Nissan Frontier only saw 50,566 registrations.
We feel compelled to point out that before Ford pulled the plug on its ancient Ranger, the company was moving some 75,000 units per year. That number had shriveled to 15,662 by 2012, which was still enough to surpass the Honda Ridgeline. Interestingly enough, one person brought home a brand-new Hummer H3T as well. But mid-sized trucks represent only a fraction of total pickup sales. Dealers sold a total of 241,471 midsizers last year compared to 988,326 half-tons.
That segment was dominated by General Motors with 533,814 sales followed by Ford at 478,204. Ram Trucks trailed behind in third with 241,204 units with Toyota close behind at 229,769. Nissan, meanwhile, remains a distant fifth. Head over to PickupTrucks.com for a closer look at the breakdown in each segment.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.