2009 Toyota Tacoma Access Cab Leather 4x4 6 Speed Manual 68k Miles Certified Fl on 2040-cars

Auto blog

Scion trying to build business case for FR-S convertible as Subaru bows out

Hope may remain for a convertible version of the Scion FR-S, according to a report from Ward's Auto. You'll recall that rumors were swirling about the feasibility of a rear-drive Toyobaru convertible as early as October, and that back in November, Subaru - which makes the FR-S, Subaru BRZ and Toyota GT86 - essentially nixed the idea of an open-topped variant.
"We make the car, so if we don't make it, it can't happen," brand chief Yasuyuki Yoshinaga told Automotive News, according to Ward's, at the Tokyo Motor Show. "Our engineering department told me that losing the entire roof requires a complete redesign of the structure. It would need a big change."
Despite Yoshinaga-san's arguments against a droptop variant, Toyota is apparently still considering the model. Speaking to media at the 2014 North American International Auto Show, Scion's US vice president, Doug Murtha, hinted that the rear-drive droptop was in the works.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.

Lexus: No plans for LFA replacement anytime soon

Supercars are fantastic in terms of their raw performance, sound and ability to inspire interest in an automaker. They aren't so good at actually making money, even for giant, global automakers like Toyota. And if you are holding out hope that Lexus might be fibbing about there being no plans for an LFA successor, we have some bad news. "I think you will see us do some incredible things in the future, but probably not a $375,000 supercar anytime soon," Lexus Executive Vice President Mark Templin told Automotive News. The issue comes down to the LFA's cost to develop and massive price. Lexus built just 500 of the V10 supercars from 2010 through 2012. Templin said that the plan was originally for a much more modest vehicle with a steel body. However, that intention changed to plans for an aluminum exterior and eventually evolved further to carbon fiber during the course of its engineering. Templin is clear that Lexus isn't giving up on more accessible performance with its F sub-brand models, but more supercars aren't coming, at least not anytime soon. He previously suggested that the LFA was a generational model with a 30-year wait for the next one. These days, the workshop that built the LFA has been converted for a much less powerful but perhaps more important vehicle. Toyota now uses it to build the Mirai with the company's hydrogen fuel cell powertrain. Related Video: Featured Gallery 2012 Lexus LFA: Review View 30 Photos News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Lexus Toyota Coupe Performance Supercars supercar lexus lfa