2001 Toyota Tacoma Pre Runner Crew Cab Pickup 4-door 3.4l on 2040-cars

Auto blog

Toyota previews new C-HR crossover concept bound for Paris

We're now just a few weeks away from the start of the Paris Motor Show, and when the doors open at the Porte de Versailles, Toyota will be among the many automakers with new wares to show - including the new concept car pictured in this latest teaser image.
Called the C-HR, the concept is designed to represent an "innovative vision for a compact crossover model", incorporating "a new design language with an engaging driving experience and a hybrid powertrain." The Japanese industrial giant isn't saying much else, but the C-HR is set to debut alongside the finalized exterior design for its upcoming new fuel cell sedan.
Toyota, of course, became a pioneer in the compact crossover segment when it introduced the first-generation RAV4 way back in 1994. If the silhouette is anything to go by, however, the C-HR concept appears to adopt a far more streamlined form. Watch this space for more.

Toyota asking NHTSA for fuel cell car safety exemption regarding electric shocks

Toyota is requesting an exemption from federal safety regulations that govern electric cars as it prepares to launch a small-scale hydrogen fuel-cell vehicle fleet.
The Japanese automaker is targeting Federal Motor Vehicle Safety Standard 305, which covers the packaging of high-voltage parts in electric cars. According to Uncle Sam, these systems need to be isolated so that passengers and first responders aren't electrocuted in the event of a crash. That seems pretty smart, but it's become a problem for Toyota's upcoming production fuel cell vehicle, as the mechanism that prevents electric shocks in low-speed crashes will apparently simply keep Toyota's car from even functioning.
Instead of the federally approved system, Bloomberg reports that Toyota plans to insulate the high-voltage wires and cables in the car, along with shielding electrical components like the fuel cells, electric motor and batteries with (presumably non-conductive) metal barriers.

How to fix a $4,000 hybrid battery problem with vinegar and baking soda

This is one of those 'Don't try this at home if you don't know what you're doing' DIY tales. Two weeks after imgur user "scoodidabop" bought a used Toyota Camry Hybrid with no warranty, he got the Christmas Tree dash display with warnings like "Check VSC System," "Check Hybrid System," and the Check Engine light. After some Internet sleuthing he figured it could be a faulty brake actuator, assuming the hybrid system warning was a false alarm. But it wasn't the actuator, it was the battery, a Toyota dealer telling him that his battery had "gone bad," and he'd need $4,457 to replace it. Then he had a brainstorm: it could be one of the cells that's gone bad, not the whole battery. Scoodidabop has some experience as an electrician, so he figured he could test it and replace any bad cells for about $45 apiece. He removed the battery unit from the trunk and over the course of two hours tested all 68 cells four times. He found nothing wrong. So he devised another type of test and checked every cell again. He couldn't find a problem with any of them. Turns out the problem wasn't in the cells, but with the dirty and corroded copper connectors at the ends of the high-voltage cables. He pulled the 34 connectors and their steel nuts, soaked them in vinegar, gave them a light steel wool scrub, soaked them in baking soda and water to counteract the vinegar, applied an anticorrosive and reinstalled them. That took an hour. When he replaced the battery, the warning lights had all gone out and the battery worked perfectly. Skill level: experience. Cost: less than $10. Perhaps it's time for hybrids to be able to test their own cells individually. Dealers, too.