2023 Toyota Sienna Xle on 2040-cars

Auto blog

Junkyard Gem: 2010 Pontiac Vibe

Just over a month before filing for Chapter 11 bankruptcy in June 2009, General Motors announced that the 83-year-old Pontiac Division would be "phased out" by the end of 2010. Only three Pontiac vehicles were sold as 2010 models in the United States: the Solstice, Vibe and G6 (new G3s were sold here during 2010 but they were all 2009 models, while the G5 was available as a 2010 model only in Canada and Mexico). Today's bit of junkyard automotive history is one of the very last Vibes ever built, found in a yard near Denver, Colorado. This car is significant not just as one of the final vehicles to bear Pontiac badges but also as one of the last cars built by the New United Motor Manufacturing Incorporated GM-Toyota joint venture in California, better known as NUMMI. The NUMMI factory began life as GM's Fremont Assembly, which built its first vehicle (a C-Series pickup) in 1963 and closed in 1982 after building its final vehicle (an Oldsmobile Cutlass Ciera). Rebooted as NUMMI, the first 1985 Chevrolet Nova (an Americanized AE82 Toyota Corolla Sprinter) rolled off the line in December of 1984. A quarter-century and better than eight million vehicles hence, NUMMI shut down production after its last Corolla was finished on April 1, 2010. While there was some noise about the Oakland Athletics building a new stadium on the site at the time, Tesla ended up buying most of the site soon after that. Tesla now builds more vehicles per year there than NUMMI ever did. The Vibe was co-developed with Toyota and based on the same platform as the ninth-generation Corolla. The Toyota Matrix was mechanically identical and was built in Canada, while the Japanese-market version (known as the Toyota Voltz) was built on the same NUMMI line as the Vibe and shipped across the Pacific. The Vibe/Matrix/Voltz got a redesign for the 2009 model year, but few noticed due to all the turmoil in the GM world at the time. The final Vibe was built in August 2009. This car was built in July of 2009, just before the end. It was living in West Texas just prior to coming to Colorado. El Paso is about a ten-hour drive from this car's current location. Once in the Centennial State, it got parked somewhere it shouldn't have been and ended up being auctioned to Pick Your Part. An occupant of this Vibe had time to sample some of the local agricultural products before that happened.

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

2019 Toyota Sienna AWD vs 2018 Chrysler Pacifica Hybrid | New meets old

The Toyota Sienna has always been an inconspicuous van. They're out there, there's a lot of them and they're huge, but they blend in with darn near everything. Perhaps Toyota noticed that a little while ago and slapped on the slightly garish grille/not a grille plastic thing in the front bumper, but it still doesn't really stand out. On the other hand, our long-term Chrysler Pacifica Hybrid, which is a great deal newer than the Sienna, has slick styling that gets noticed. Toyota hasn't properly redesigned the Sienna since the 2011 model year, and it shows on every front. Despite its many shortcomings, there are still some valid arguments for going with the dinosaur. Ride and handling Of all the reasons to choose a Sienna over the much newer competition, available all-wheel drive has to be the main one. My tester was so equipped, and I got a chance to test it out in both snow and ice. Obviously, the first thing I did in powder was see if the rear end would break loose. I can confirm that with traction control off, the Sienna will slide around a little bit. You won't be doing any sick drifts, but it's undoubtedly more fun than our Pacifica. The Chrysler is fitted with Nokian Hakkapelitta winter tires. As you might guess, this means that braking and grip around corners is better than the Sienna in snow. If the Sienna were to ditch its slippery all-seasons for a proper set of winters, it would be running circles around the Pacifica. Still, I drove our Pacifica through a lake effect blizzard in Buffalo and it never blinked from lack of traction with multiple inches of snow on the ground. Some folks are going to want the assurance of all-wheel drive, and the Sienna will offer it, but don't make it your only option. All-wheel drive might help you get going, but winter tires are there to save the day when sledding gets tough. What impressed most about the Sienna was its ride quality and composure. This van earned its road warrior status on my drive to the Chicago Auto Show from Detroit. The long highway trek was handled without issue by the big minivan chassis. Bumps and road imperfections were soaked up well. Noise wasn't much of an issue either, something minivans can struggle with given the massive amount of space in the cabin ripe for vibrations and rattles. However, an uncomfortable seat led to some soreness after over four hours in the saddle. No matter how I adjusted the lumbar, it didn't seem to take to my 5'10" slim frame.