2013 Toyota Sienna Le on 2040-cars

Auto blog

Legal approach in $1.2 billion Toyota settlement could impact handling of GM recall cases

In the past, if an automaker did something wrong, they were usually prosecuted by the US government through something called the TREAD Act. Short for Transportation Recall Enhancement, Accountability and Documentation Act, it basically requires automakers to report recalls in other countries, along with any and all serious injuries or deaths, to the National Highway Traffic Safety Administration.
Failing to report or attempting to conceal anything when there's been a death or serious injury constitutes a criminal liability. The idea is that this setup puts the onus on manufacturers to keep NHTSA apprised of safety related issues before they become a problem in the US, thereby allowing the regulator to better protect consumers.
In theory, it sounds like a relatively airtight set of rules for dealing with misbehaving automakers. That didn't stop the US Department of Justice from ignoring TREAD in its prosecution of Toyota's handling of the unintended acceleration recall, though. The result of this new approach, which charged Toyota with wire fraud, was a $1.2 billion settlement. Now, the wire-fraud approach could be used for the expected case between the US government and General Motors, based on the statements of Attorney General Eric Holder, who specifically mentioned "similarly situated companies" when discussing Toyota.

Recharge Wrap-up: Automakers talk connected cars, Toyota's CNG hauler

Tesla, Toyota and General Motors addressed the House Subcommittee on Information Technology about the security and benefits of "The Internet of Cars." Tesla put forth four suggested security principles for the security of connected cars. Those include standard cryptography ("signing") used by automakers, measures to prohibit direct connection over the internet, isolation of a car's networked systems from its mechanical systems and standard encrypted communications protocols. Tesla VP of Business Development Diarmuid O'Connell also urged against "overly restrictive regulation." O'Connell says, "Regulation at a time of rapid innovation runs the risk of limiting the realization of the full extent of safety advances." See the hearing in the video above, and read more at Teslarati. Details over the rollout of new DC fast chargers by NRG eVgo and BMW leave some i3 owners disappointed. The partners will add 500 fast-charging sites to the eVgo network in 25 cities by the end of 2015. The "Fast Combo" chargers will be available to use for free for BMW i3 customers for 24 months. The free charging only applies to new buyers, though, leaving behind some 15,000 current i3 owners. Still, many EV drivers – not just BMW owners – will benefit from the ability to charge quickly in more places. Read more at Green Car Reports. Toyota has announced its first CNG car hauler. The automaker's in-house transport company, Toyota Transport, will operate the truck out of Long Beach, California. The truck, which Toyota says emits 85 percent less particulate matter and 10 percent less CO2, will drive about 7,000 to 8,000 miles per month. "We started exploring the CNG option more than three years ago, and it has been worth the wait," say Toyota Transport Compliance Senior Analyst Kirk Welch. "Natural gas is the cleanest burning fossil fuel and will help Toyota advance our environmental efforts to reduce fleet emissions." Read more in the press release below. Making Your New Toyota Run Cleaner Before You Even Start It Toyota's Latest Car Hauler Runs on Compressed Natural Gas November 23, 2015 TORRANCE, Calif. (Nov. 23, 2015) – Toyota Transport, the automaker's in-house vehicle transportation trucking company, now has its first car hauler that runs on Compressed Natural Gas (CNG). The Long Beach, CA based truck/trailer does what any other car hauler can do, except it does it while emitting 85 percent less overall particulate matter and 10 percent less carbon dioxide.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.