Platinum Suv 5.7l Nav Back Up Camera Sunroof Leather One Owner Tow Package Clean on 2040-cars

Auto blog

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017

Toyota breaks ground on new Texas HQ

Automakers are on the move in America: Cadillac is shifting from Detroit to New York, Mercedes is moving its US headquarters from New Jersey to Atlanta, and Toyota is relocating its North American operations from locations around the country to a new facility outside of Dallas in northern Texas. That process started yesterday when the Japanese automaker broke ground at the new facility. Toyota used a 2015 Tundra TRD Pro Series pickup to officially break ground at the intersection of Headquarters Drive and Palomino Crossing in Plano, TX, with the city's mayor joining Toyota Motor North America CEO Jim Lentz and a crowd of 100 dignitaries. Toyota announced the relocation back in April, and in the months since has purchased the property, hired a developer, architect and project manager, and filed preliminary plans with city hall. The site is set to be ready late in 2016 or early 2017, moving operations from California, Kentucky and New York. Other facilities like the one in Ann Arbor, MI, will not be affected by the relocation. Related Video: TOYOTA PLOWS FORWARD IN PLANO, BREAKS GROUND ON NEW HEADQUARTERS PLANO, TEXAS, JAN. 20, 2015 – A V-8 engine growls, and the earth moves. With the roar of a 2015 TRD Pro Series Tundra, Toyota today formally broke ground on its new North American headquarters at the intersection of Headquarters Drive and Palomino Crossing in Plano, Texas. The Tundra took center stage, bulldozing the first soil on the site of Toyota's new campus in a manner that can only be described as not your traditional groundbreaking ceremony. "The support and encouragement we've received from the community, civic leaders, business partners and nearby corporations has been nothing short of tremendous," said Jim Lentz, Toyota Motor North America chief executive officer. "Our goal is to build an environmentally-sustainable campus that our new neighbors will welcome and our team members and associates will be proud to call home." Toyota also unveiled an installation during the ceremony: the word "TOYOTA" in large letters, standing 10 feet tall and 64 feet wide. Inside each letter are native Texan Yaupon Holly trees, which represent "wish" trees, a Japanese cultural tradition. Students from the Plano ISD Academy High School and community participants contributed to the event by adding handwritten notes to the trees representing their wishes, dreams, hopes and inspirations.

Toyota recalls 337,000 RAV4s and HS250h models for tie rod failure

UPDATE: The post has been updated with additional information from NHTSA. The Basics: Toyota is recalling 337,000 2006-2011 model year Toyota RAV4 crossovers built between October 31, 2005 and September 7, 2010 as well as 2010 model year Lexus HS250h cars built between July 6, 2009 and August 26, 2010. The Problem: When either an affected RAV4 or HS250h is given an alignment and the tie rod adjustment nut on the rear control arm isn't tightened properly, the threads on the tie rod can start to rust. If this happens, the nut may break off and throw off the alignment drastically and suddenly. This isn't a case of the car simply pulling to one side, either. This would seriously upset the balance of the car and could cause the driver to lose control and crash. This is also the third time these vehicles have been recalled for the same issue. Injuries/Deaths: It's unknown if this control arm issue has resulted in any injuries or deaths. Autoblog reached out to Toyota for more information, but a company representative told us that the company isn't able to discuss injuries or deaths caused by this issue (if any) at this time. Based on information from NHTSA documents, it does not appear that any crashes, injuries or deaths have been attributed to the defect addressed in the current recall. The Fix: The dealer will completely replace the rear suspension assemblies at no cost to the owner. The tie rods and nuts will also be coated in epoxy to prevent future rusting from occurring. According to Car and Driver, the previous recalls involved tightening nuts, coating decent tie rods in epoxy and completely replacing rusted ones. The car magazine reports that further complaints were filed and the company is now replacing all components regardless of condition. If you own one: Toyota will notify owners of affected cars by mail. Owners can also check whether their cars are affected by entering the VIN at safercar.gov/vin. Owners with questions can also reach Toyota customer service at 1-800-331-4331 or Lexus customer service at 1-800-255-3987. Related Video: Featured Gallery 2012 Toyota RAV4 View 16 Photos News Source: Car and Driver, Toyota, National Highway Traffic Safety AdministrationImage Credit: Toyota Recalls Lexus Toyota Safety lexus hs 250h lexus hs250h