2013 Toyota Sequoia Platinum on 2040-cars

Auto blog

Are Toyota and Lexus planning to use Mazda's straight-six and new platform?

Japan's Best Car magazine has what appears to be a whopper of a rumor. The mag said it scooped Mazda's development of a straight-six engine that Mazda only revealed in March, the carmaker having buried the information in a financial statement. By way of Lexus Enthusiast and according to Google translate, Best Car writes that as it was speaking to a Toyota source on an unrelated matter, the magazine found out that Mazda's work on the straight-six was predicated on the engine's use in Toyota Group vehicles, which includes Lexus. Here's the account of how the engine and Mazda's coming front-engined rear-drive platform, dubbed "Large Architecture," will make their way to Toyota City: The first appearance for the straight-six, predicted to come in at a hair under 3.0 liters, is the Mazda Atenza/Mazda6 successor coming around 2022. The powertrain will get a 48-volt hybrid system for increased fuel economy, and the automaker's said to be considering a plug-in hybrid version. Toyota's first shot at the platform and the straight-six will be whatever fills the slot of the Japanese-market Mark-X sedan. We once had a version of the Mark-X in the U.S. as the Toyota Cressida. In Japan, it's sold as a rear- and all-wheel drive option to the Camry. The Mark-X is slated to end production in December this year — a "sporty four-door coupe" on Mazda's platform and with Mazda's engine eventually taking its place. Lexus has a number of plans for the components from Hiroshima. The next Lexus IS is said to evolve from the current sedan, using a Lexus V6 but migrating to Toyota's TNGA platform. Best Car says the IS after that, perhaps sometime around 2026, will hop onto Mazda's new platform and use the inline-six engine. Before that, the replacement for the Lexus RC in 2022 will sit on the Mazda platform and get that inline-six. What's more, Lexus will introduce a new model to slot between the $64,750 RC and the $92,950 LC employing Mazda's architecture and engine. Best Car says the model will act as a "next car" for RC owners, but we can't tell if the magazine means a two-door or a four-door coupe; the article also says the Lexus model will compete with the Audi A7. Toyota and Mazda partnered up in 2016 on technology sharing. Best Car's take is that, as was done on the Supra, Toyota is picking up all the tech it can from suitable sources so that it can continue to sell models that don't make sense to develop alone.

Ford F-150 could be affected by tornado-damaged supplier in S.C.

The disruption caused by a tornado that severely damaged a South Carolina auto-parts plant and killed a contract security guard last week could be felt by more automakers than just Ford and affect more than just its best-selling F-Series pickup, which is due for an update. And there’s still no estimate for when operations might resume at the plant. The Detroit Free Press reports that the BorgWarner plant in Seneca, near Greenville, makes transfer cases for F-150 and Super Duty pickups, the Ford Explorer and Expedition, Transit cargo vans, and Lincoln Navigator and Aviator SUVs. ItÂ’s also a supplier for the Ram 1500 and Toyota Tundra trucks. Transfer cases shift power from the transmission to the front and rear axles in four-wheel-drive vehicles. BorgWarner says it still has no update for when it might partially or fully resume operations. The tornado that ripped through the area in the western part of the state on April 13 tore the roof, walls and signage off the factory and killed a 77-year-old contract worker when the security building he was sheltering in collapsed. Only four or five others were inside the plant, which has been idled because of the coronavirus outbreak, when the tornado struck. In an SEC filing on Friday, Ford said it has sent employees to the site to help BorgWarner and assess the damage to FordÂ’s tooling. “Initial assessments indicate that the Ford tooling was not materially damaged in this incident,” Ford said in the filing. “We do not have sufficient information to estimate when the facility will be back on-line or whether or the extent to which this incident will impact our plans to resume production of four-wheel drive and all-wheel drive vehicles.” A Fiat Chrysler spokeswoman also told the Freep the company was working with BorgWarner on recovery plans. A Toyota spokesman told Autoblog that "we are collaborating with BorgWarner to help restore production for transfer cases for Tundra assembly. We are confident that theyÂ’ll fully recover over time." Like other automakers, Ford shut down production at its U.S. plants last month as a precaution against the coronavirus pandemic. But Ford hasnÂ’t yet said when it plans to reopen its factories. FCA is targeting May 4 to resume production. Models like the F-150 and Lincoln Navigator are major sources of profit for Ford, which estimated it lost $2 billion in the first quarter.

Would you pay $17 a month to give your older Ford connectivity?

When it was first introduced in 2007, there was nothing like the original Ford Sync system, since it allowed car owners to connect and use a portable device better than anything that came before it. And because it was a brought-in/tethered and software-based system, Sync leveraged a device's connectivity and was easily updated. It took competitors awhile to catch up: Toyota Entune wasn't available until 2011, and Chevy MyLink didn't roll out until 2012. But now Ford is the one playing catchup since it stuck with the brought-in strategy while most other automakers were quicker to add connectivity via an embedded cellular modem. Ford initially installed 2G/3G modems in its small fleet of electric and plug-in electric vehicles starting in 2012 so that owners could keep tabs on charging. Embedded connectivity came to Lincoln in 2014, and Ford began adding onboard 4G LTE via Sync Connect to select cars starting with the Escape in 2015. To get more cars connected more quickly, last week the automaker rolled out its FordPass SmartLink solution that plugs into the OBD port of 2010 to 2017 model year vehicles. This lets owners retroactively get onboard Wi-Fi, set up a "geo-fence" to keep tabs on a car's location, receive vehicle health reports and allows remote engine starting and door locking/unlocking using a smartphone app, among other features. But to connect older Ford vehicles will cost owners $16.99 a month for two years, not including installation. Ford throws in 1 GB of data or a 30-day trial, whichever comes first, after which owners have to add the vehicle to their Verizon shared data plan, which supplies connectivity for SmartLink, or establish a new account. (Disclosure: Autoblog is owned by Verizon.) By comparison, GM's 4G LTE data plans start at $10 a month for 200 MB and goes up to $30 for 3 GB, and owners can also add a car to an AT&T shared-data plan. But OnStar doesn't have a separate monthly subscription for the embedded modem or an installation charge, and standard features via the RemoteLink Mobile App are free for the first five years of ownership. FCA's Uconnect Access service also uses an embedded modem to provide similar telematics features for $20 per month following a free one-year trial, while a la carte in-car Wi-Fi is offered for $10 per day, $20 per week or $35 per month.