Rare Rav 2-door Convertible on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

177k Toyota Camry Hybrids being recalled for brake issue

It looks like Consumer Reports might be getting part of what it wants regarding the Toyota Camry Hybrid and its braking system. Toyota is issuing what it calls a limited service campaign, rather than a full recall, covering about 177,500 of the hybrid sedans from the 2007 through 2011 model years because of an issue with the cars' brake fluid reservoirs.
The models have a filter separating two chambers of the brake fluid reservoir, and the part can get clogged over time. If this happens, the fluid level in one of the chambers can get too low and eventually cause the power assist to fail. There are multiple warning lights on the dashboard that illuminate over time if the filter gets obstructed, though. The company is replacing the entire reservoir with an improved unit, and the fix takes about two hours to perform.
Consumer Reports recently began asking for a recall on these models for the potentially clogged filters. The magazine also reported a second issue with the ABS brake actuator that could lead to a difficult to depress brake, but Toyota has increased the warranty on the part to 10 years or 150,000 miles.