2014 Toyota Rav4 Le on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

GM repairing 40,500 Pontiac Vibes as part of Toyota airbag recall

General Motors has confirmed to Autoblog that the Pontiac Vibe is included in Toyota's just-announced recall action. The Vibe and the Toyota Matrix share a large number of parts, including the affected cable to the airbag.
"About 40,500 Pontiac Vibes from the 2009-2010 model years are included in the Toyota recall. Toyota designed and engineered the Vibe for Pontiac. GM will service customers with these vehicles when Toyota makes the parts available," said GM recall spokesperson Alan Adler to Autoblog in an email.
The recall covers 1.3 million Toyota units in the US, including 2009-2010 Corolla, Matrix and Tacoma, the 2008-2010 Highlander, the 2006-2008 Rav4 and 2006-2010 Yaris, plus the addition of the 2009-2010 Vibe. The models all have their airbag module attached via a spiral electrical cable. The connections on this cable can be damaged when turning the steering wheel. Once broken, the airbag deactivates and the airbag warning light comes on. Toyota has an improved part, but it's still making preparations to begin repairs. It will begin notifying owners soon.

World Car Awards finalists snub American-branded vehicles — except for Bronco

The list of World Car Awards has been whittled down to 10 finalists, but only one American brand — Ford — appears among the remaining nine carmakers for this yearÂ’s top award. The Bronco is there, and it also is balloted as a finalist in the design category. The other categories are performance car, urban car, electric vehicle and luxury model. Each category has five finalists except World Car, which has 10. One brand conspicuous by its absence in any category: Tesla. The winner in each is scheduled to be crowned March 27 at the New York International Auto Show in Manhattan. This year marks the 20th year of the World Car Awards and the partnership with the New York show. The selection process involves 100-plus automotive journalists from 29 countries who vote, as they review and test-drive the eligible vehicles for the 2024 awards. Their journey is captured virtually on World Car TV. If youÂ’re counting, the brands that appear most on the six finals lists are Mercedes-Benz (four times), BMW (also four), Hyundai (three), and Volvo (three). HereÂ’s the full listing. A video clip showing all of them is here: World Car -BYD Seal / Atto 4 -Ford Bronco -Hyundai Kona / Kona Electric -Hyundai Santa Fe -Kia EV9 -Mazda CX-90 -Subaru Crosstrek -Toyota Prius -Volkswagen ID.7 -Volvo EX30 World Car Design of the Year Ford Bronco Ferrari Purosangue Toyota Prius Volvo EX30 Zeekr X 2024 World Electric Vehicle BMW i5 Kia EV9 Mercedes-Benz EQE SUV Volkswagen ID.7 Volvo EX30 2024 World Luxury Car - BMW 5 Series / i5 - Lexus LM - Mercedes-Benz CLE - Mercedes-Benz E-Class - Mercedes-Benz EQE SUV 2024 World Urban Car  - Abarth 500e - BYD Dolphin - Lexus LBX - Suzuki Fronx - Volvo EX30 2024 World Performance Car - BMW M2 - BMW XM - Ferrari Purosangue - Hyundai Ioniq 5 N - Porsche Cayenne Turbo E-Hybrid