2011 Toyota Rav-4 Limited 4wd! Rear-cam Heated-sts Push-start Moonroof 1-owner!! on 2040-cars

Auto blog

Toyota announces production increase for Mirai fuel cell vehicle

Toyota is building them. People are coming. So Toyota's going to build some more. Cue the strings. The Japanese automaker apparently got more than it bargained for after starting sales of its first mass-produced hydrogen fuel-cell vehicle last month. On Thursday, Toyota announced plans to ramp up production starting next year. Toyota will build 700 Mirai units this year, and will then bump that to 2,000 vehicles next year and 3,000 in 2017. The previous production plan had the same numbers, except for what would happen in 2017. The increase is coming because Toyota's already received pre-orders for 1,500 Mirai vehicles. With US and European sales slated to start later this year, Toyota didn't want to leave itself short-stocked. Toyota confirmed what was already being surmised last month by the Japanese newspaper Nikkei, which said that Toyota was ready to spend almost $170 million boosting production capacity of the Mirai. Most of this year's sales will be in Japan, with the US and Europe gradually accounting for a larger chunk starting next year. In November, the automaker disclosed details of the Mirai's initial US sales, saying that the model will be available in California this year for either a base price of $57,500 or a lease price of $499 a month for 36 months (with $3,649 due at signing). And if that sounds steep, remember that the hydrogen refueling, wherever it can be found, is free for as long as three years. Check out Toyota's press release on the bumps in production below. Toyota to Increase 'Mirai' Production Toyota City, Japan, January 22, 2015-Toyota Motor Corporation today announced that it will increase production of the "Mirai" fuel cell sedan, which launched in Japan on December 15, 2014. The new plan calls for production to increase from the 2015 level of 700 units to approximately 2,000 units in 2016 and approximately 3,000 units in 2017. Considering the approximately 1,500 orders received in the first month of sales in Japan, and the upcoming launches in Europe and the United States later this year, it was decided that the supply structure should be adjusted to reflect the level of demand for the vehicle. Sales plans for Japan, the U.S. and Europe following the production increases will be formulated taking into consideration each region's level of hydrogen infrastructure development, energy policies, car-purchasing subsidies, consumer demand, environmental regulations, and other factors.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2018 Technology of the Year Award | We chat with Lexus about the LC 500h's hybrid system

Every year, Autoblog editors test dozens and dozens of the newest vehicles available, sometimes even before they're available. From those vehicles, we select the ones we think provide the most innovative technology in the industry. Then we pare the list down to the very best, test them again, and vote on our winner for Technology of the Year. This year, Lexus's multi-stage hybrid system — as tested in the LC 500h — came out ahead of the rest of the finalists. We chose the 2018 Detroit Auto Show to hand over the award to Lexus Group Vice President and General Manager Jeff Bracken. He was kind enough to sit down with Autoblog Senior Editor Alex Kierstein and Green Editor John Snyder at the Lexus stand to talk about the hybrid system, what it does, and what it means for the future of Lexus and Toyota. Check out the video above, and follow along for all our coverage from the 2018 North American International Auto Show in Detroit, where we are taking a look at all of the new cars and technology that we'll see in the near future. Perhaps the next winner of Autoblog's Technology of the Year award is sitting somewhere on the Detroit show floor. Related Video: Green Detroit Auto Show Lexus Toyota Fuel Efficiency Green Automakers Technology Technology of the Year Coupe Hybrid Luxury Performance Videos Original Video 2018 detroit auto show