2005 Toyota Rav4 Base Awd on 2040-cars

Auto blog

MotorWeek proves '90s were awesome with Supra, Stealth, RX-7, Corvette, 968, 300ZX comparo

Oh, the heady days of 1993, back when the Clinton Presidency was just getting underway, and it seemed like every hot new rock band was coming out of Seattle. Sports cars in the US had finally shaken off the shackles that slowed them during the '70s and '80s, and you could buy any number of legitimately quick vehicles again. MotorWeek recently went digging into its archives to find this six-model test from 1993 showing off some of the best semi-affordable performance coupes that money could buy at the time, and it's priceless.
Featuring the 1994 model year Toyota Supra in twin-turbo guise and MY 1993 versions of the Porsche 968, Nissan 300ZX TT, Mazda RX-7, Dodge Stealth R/T Turbo and Chevrolet Corvette LT-1, MotorWeek definitely covered all of the bases. One thing that might surprise younger readers is these cars' performance. The video only provides 0-60 acceleration times, but several of these vehicles would still be considered pretty potent today - over 20 years since going on sale. The Supra is especially impressive, hitting 60 miles per hour in just 5 seconds. Even today, that's nothing to sneeze at.
Given their performance potential and still-attractive looks, it's amazing that some of these coupes are old enough to drink now. The progress of interior design and safety equipment in the intervening years is pretty shocking, though. In most of these models, having two airbags is touted as a big deal. Scroll down to watch a Throwback Thursday blast from the past about some of the '90s best sports cars.

Ram takes out frustrations on Camry

No, not a Ram pickup truck. This is an actual ram, as in a male sheep, headbutting the hell out of a Toyota Camry that made the unfortunate decision to interrupt its battle with a rival member of the flock. Now, before you say, "How dare that Camry harm that cuddly sheep," we'd like to point out just how viciously the two males were fighting before the Toyota butted in. And after smashing the driver's side front fascia, the ram goes right back to attempting to beat down its opponent. All things considered then, we'd call this Ram: 1, Camry: 0.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.