2007 Toyota Prius 5dr Hb on 2040-cars

Auto blog

Hyundai, Kia, Genesis and Subaru clean up in IIHS 2018 safety ratings

Hyundai, its partner Kia and its Genesis division are the big winners in the latest vehicle safety ratings from the Insurance Institute for Highway Safety, accounting for six of the 15 models that earned the Top Safety Pick+ awards for 2018. Subaru was right behind with four, Mercedes-Benz had two, and Toyota, BMW and Ford each had one. Another 47 vehicles earned the Top Safety Pick designation, where Toyota had 10 vehicle models, with Hyundai recognized for nine models. All but one of the seven vehicles in Subaru's lineup, the BRZ, qualified for one of the awards. IIHS strengthened the criteria for the Top Safety Pick+ award for 2018 to require headlights to earn a "good" rating — an "acceptable" rating was previously enough to notch the "plus" award — and good or acceptable passenger-side protection in the small overlap front crash, which replicates a crash involving just the front corner of a vehicle. It also required vehicles to have acceptable or good headlights for the first time to earn a Top Safety Pick award. Most of winners for both awards qualified on the basis of optional upgrades. IIHS in October began evaluating the passenger side of vehicles in its small overlap front crash test after it said it became clear that automakers were neglecting that side of the vehicle as they focused on improving driver-side protections. IIHS first began conducting driver-side small overlap crashes in 2012. It began measuring both how well low and high beams illuminated the road and the amount of glare they produce for oncoming vehicles as part of its ratings in 2016. The Top Safety Pick+ winners are listed below. The list doesn't include any minivans, pickups or minicars, which don't appear on either list of awardees. Small cars Kia Forte Kia Soul Subaru Impreza (sedan and wagon) Subaru WRX Midsize cars Subaru Legacy Subaru Outback Toyota Camry Large luxury cars BMW 5 series Genesis G80 Genesis G90 Lincoln Continental Mercedes-Benz E-Class sedan Midsize SUVs Hyundai Santa Fe Hyundai Santa Fe Sport Midsize luxury SUV Mercedes-Benz GLC The full list of Top Safety Pick winners is available here.Related Video: Image Credit: IIHS BMW Genesis Hyundai Kia Lincoln Subaru Toyota Safety Crossover SUV Wagon Sedan crash test

Who sold the most small/midsize pickups in 2012? PickupTrucks.com investigates that, too

PickupTrucks.com has taken another look at the sales of its favorite vehicle bodystyle as part of an ongoing series. According to registration data from R.L. Polk, the Toyota Tacoma easily took the crown as America's best-selling mid-sized pickup, with 133,477 units rolling into new homes in 2012. For comparison, the second-place Nissan Frontier only saw 50,566 registrations.
We feel compelled to point out that before Ford pulled the plug on its ancient Ranger, the company was moving some 75,000 units per year. That number had shriveled to 15,662 by 2012, which was still enough to surpass the Honda Ridgeline. Interestingly enough, one person brought home a brand-new Hummer H3T as well. But mid-sized trucks represent only a fraction of total pickup sales. Dealers sold a total of 241,471 midsizers last year compared to 988,326 half-tons.
That segment was dominated by General Motors with 533,814 sales followed by Ford at 478,204. Ram Trucks trailed behind in third with 241,204 units with Toyota close behind at 229,769. Nissan, meanwhile, remains a distant fifth. Head over to PickupTrucks.com for a closer look at the breakdown in each segment.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.