2004 Used 1.5l I4 16v Automatic Front Wheel Drive Sedan on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Automakers score 8 out of top 20 most-watched ads on YouTube [w/videos]

Who would have ever thought there'd be a day where people are able to skip television commercials only to go to websites to watch them later? Such is the joy of a DVR and YouTube. AdWeek tabulated the 20 most-watched ads on YouTube, and found that nine were car-related including eight coming from automakers.
Volkswagen continued its Star Wars theme with two ads in the top 20, including the highest-ranking car commercial The Bark Side spot at number three with almost 18 million views, which doesn't even have a single car in it. Some of our favorites are from Chrysler with Clint Eastwood in It's Halftime in America and House Arrest with Charlie Sheen for the Fiat 500 Abarth. Chevrolet, Honda, Audi and Toyota were the other automakers in the top 20, but we'd be remiss if we didn't at least mention one of the coolest ads on the list, the Hot Wheels corkscrew jump.
Of all the car videos, only the Fiat ad wasn't played during a Super Bowl. Check out all eight videos - in order - after the jump. Nike took the top spot with its My Time is Now ad that has been seen online more than 20 million times with Pepsi's Uncle Drew posted up in the runner-up; some of the other videos include four Old Spice commercials and an ad in which Snoop Dogg is pedaling Hot Pockets.

Next-gen Toyota Prius spied inside and out

Toyota has built itself into the industry's standard-bearer when it comes to hybrids, and it isn't going to let the poster child for gas-electric vehicles get stale on the market. These spy shots captured in California are our first good look at the next-generation Prius, which could come to market wearing a 2015 model year designation.
Even though it looks like Toyota may have blown its annual camouflage budget on this mule, we can clearly see that it will have the same iconic half-moon design that has been with the car since 2003. If so, this goes against reports from last year that suggested the car would be getting a different look inspired by the 2013 NS4 Concept. Although, this could also indicate that the Prius family will continue to grow - adding a new sedan - to the existing Prius C, Prius V and Prius Plug-In lineup.
These spy shots also give us an indication as to what the interior will look like, with a more stylish three-spoke steering wheel and an instrument panel design that sort of reminds us of a BMW. On the other hand, all the tape, cobbled together pieces and lack of space for a center stack display screen has us thinking this isn't what the final product will resemble.