2014 Toyota Prius Three on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2016 Toyota Tacoma fears no canyon in Detroit

It took a lot for it to finally happen, but with the 2015 GMC Canyon and Chevrolet Colorado posing a clear and present danger to its near monopoly in the mid-size pickup market, Toyota finally introduced a new version of its Tacoma. Introduced at the 2015 Detroit Auto Show, the long-serving Taco has been refit, ditching its old, thirsty and uncouth 4.0-liter V6 with a Toyota's smooth-revving and powerful 3.5-liter, naturally aspirated six pot. Output figures haven't been published, but considering the V6 churns out around 270 horsepower and 250 pound-feet of torque in vehicles like the Toyota Camry and Highlander, we should expect similar numbers in the 3.5's first truck application. Joining the six-pot will be the previous truck's 2.7-liter four-cylinder. Beyond the powertrain tweaks, Toyota has delivered a significantly updated aesthetic that borrows elements of the 4Runner with newer design touches. A strong, prominent grille and muscular fender arches are fitting touches, while the new wheel design, one of our, featured on the show Tacoma deliver some added visual impact. The cabin, meanwhile, could best be thought of as that of a baby Tundra, sporting a similar layout and, when properly equipped, materials and touches that wouldn't look out of place on its big brother, the Tundra. Take a look at our full crop of live shots, available up top.

Manga stylized Toyota Aygo takes on Godzilla

Japan has given the world so much to enthuse over. We're not sure the Toyota Aygo is necessarily one of them as much as, say, the Scion FR-S or Lexus LFA (especially since it's actually made in Europe), but for many Nipponophiles, the centuries-old artistic discipline of Manga certainly is. And now the two have come together in this two-and-a-half-minute animated short.
In Toyota's own take on the classic narrative, an Aygo animated by celebrated artist Sonia Leong takes on Godzilla. As in, a giant lizard rampaging through a Japanese city, not the Nissan GT-R, against which the little Toyota would certainly stand even less of a chance by any metric other than affordability, fuel economy or ability to park in tight spots.
In any case, watch this Manga-fied video above, and feel free to read through the related press release below.