2014 Toyota Prius C Two on 2040-cars

Auto blog

2018 Hyundai Kona vs other small crossovers: How they compare on paper

The 2018 Hyundai Kona is the hottest new thing in the hottest new segment: subcompact crossovers. Or B-segment SUVs. Or whatever you might want to call this hodge-podge collection of vehicles of vaguely similar specs. Each is pretty much just a raised hatchback in some form (or literally in the case of one entry), skewing the increasingly vague line between car and SUV. If there was ever a segment that deserved the term "crossover" for more reasons than just its car-based unibody architecture, this would be it. Now, for this specs and photos comparison, we lined up the new 2018 Kona with an appropriate variety from that hodge-podge. Most are those that people are actually cross-shopping the Kona against — the Honda HR-V, Toyota C-HR and Subaru Crosstrek — while the Kia Soul and Jeep Renegade line up well in other regards. There are certainly others we could've included, but we're frankly a little pressed for spreadsheet space, and if you really want to know how a Chevrolet Trax, Fiat 500X or Ford EcoSport would've stacked up, you can always use our Compare Cars feature. (You can also check out our Mitsubishi Eclipse Cross comparison that includes a few larger choices) Performance, fuel economy and drivetrains Immediately you can see how all over the map this segment is. True, all but the Jeep come with a standard naturally aspirated four-cylinder and fairly comparable horsepower. Torque differs, but not wildly so. Then things get nuts. Some are automatic only, the Toyota is CVT only, the Honda and Subaru come with a manual standard and offer a CVT as an option. The Renegade's base engine is manual-only ... in 2018. Of course, then things flip-flop with the Renegade's upgrade being naturally aspirated and the Hyundai and Kia offering turbocharged mills. The Korean corporate cousins also come with automated manuals, whereas the Renegade has a box with nine gears selected by a lethargic monkey. Then there's the drivetrain. The C-HR is front-drive only, which pretty much cements the Soul's place in a segment it arguably created despite not offering all-wheel drive. That's the only way to get the Crosstrek, while the Honda and Hyundai offer a typical option of a part-time system. In Jeep fashion, the Renegade's "four-wheel drive" systems differ by trim level.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Post-earthquake, Toyota prepares to reopen some plants in Japan

Toyota will restart vehicle production at most of its closed factories in Japan next week, but the factories that build the Mirai and many Lexus models will remain closed through at least April 28 and possibly longer. The earthquakes around the city of Kumamoto on the island of Kyushu forced the automaker to stop most of its assembly throughout the country due to a lack of parts supply. Toyota will reopen the plants in phases from April 25 to 28. However, the Motomachi factory with its LFA works, which makes the Mirai, and the Miyata factory will remain closed. These sites also build the Lexus NX, RX, ES, GS, and CT, according to Toyota. The automaker didn't say when production would begin again or how this would affect vehicle supply. "In the update, we received this morning from TMC, they said that at this stage it is too soon to tell what the impact on production will be, so we can't say yet whether there might be vehicle shortages in the US," spokesperson Aaron Fowles told Autoblog. While the quakes were focused on Kyushu, they damaged Aisin Seiki factories, which supplied parts to Toyota plants across the country. The automaker worked with its partner to import the necessary components from China and Mexico, and Aisin started moving molds from the damaged plants to operational ones in Japan, which gets production under way sooner. Automotive News Europe estimates the week of lost production cuts total assembly by 90,000 vehicles. It could cost Toyota the equivalent of $458.2 million to $641.5 million. The company could make up some of the losses through overtime. Toyota says these plans are subject to change because on ongoing tremors in the region, which could cause more damage. Reuters reported there was a magnitude 5.5 aftershock in the Kumamoto area on April 19. So far, the quakes have killed at least 47 people and around 100,000 people have moved to evacuation centers. Toyota to Restart Production on Vehicle Assembly Lines in Japan from April 25 Apr. 20, 2016 Toyota City, Japan, April 20, 2016-Between April 25 and 28, Toyota will restart production on most of its vehicle assembly lines in Japan. On April 17, Toyota announced that, due to parts shortages resulting from the severe earthquakes that struck Japan's island of Kyushu last week, production would be suspended on almost all of its vehicle assembly lines in stages between April 18 and 23.