Toyota Land Cruiser 1992 4dr 80 Series Restored A Lot Of New Upgrades on 2040-cars

Auto blog

Toyota, Subaru developing RAV4-sized electric crossover and platform for more EVs

TOKYO — Toyota and Subaru announced they will jointly develop a battery-electric crossover on a platform developed for multiple production vehicles. The first crossover built on the platform will be a C-segment vehicle, which will be a small vehicle similar in size to a Toyota RAV4 or Subaru Forester. It will also be sold by both brands with altered styling and badging. The small crossover will only be the first vehicle to use the platform, though, as it's being developed for use in medium-small C-segment sedans and both D-segment larger sedans and crossovers. So we could see electric cars similar to the Corolla and Impreza, Camry and Legacy, and even the Highlander and Ascent on this platform in the future. Not surprisingly, this first electric crossover will have all-wheel drive, and the companies said that Subaru would provide all-wheel drive expertise with Toyota adding its electric powertrain knowledge. It's a safe bet that all of the future Subarus on the platform will have all-wheel drive, but it will be interesting to see if Toyota offers two-wheel- and all-wheel-drive iterations of its vehicles. The move to share technology underlines the conundrum facing Toyota and other global automakers, which are competing to develop new vehicle technologies including all-battery electric cars and self-driving cars, which require massive investment. "Subaru and Toyota believe that it is necessary to pursue a business model that goes beyond convention, crossing over industrial boundaries," the automakers said. Toyota is looking to partnerships with rival automakers and tech firms to reduce its capital outlay for developing these new technologies. In April, it announced it would supply other automakers with its hybrid technology, an area it has led since it pioneered the Prius in 1997. It also recently released the 2020 Toyota Supra, which shares a majority of its powertrain and chassis, among other things, with the 2020 BMW Z4. Toyota also provided hybrid development assistance to Subaru on the Crosstrek plug-in hybrid. Subaru, although experiencing massive, continual sales success, particularly in crossover and all-wheel-drive obsessed America, is still a small car company in the grand scheme of things. As such it's struggling to independently invest in and develop lower-emission vehicles and on-demand transportation services widely seen as necessary to survive technological upheaval in the global auto industry.

Toyota finds 10% MPG improvement in hybrid PCU

Keeping up its from-all-angles approach to efficiency, Toyota has found yet another way to eke out up to ten percent more precious MPGs in its hybrid vehicles, this time electronically. The automaker has announced the development of new silicon carbide (SiC) power semiconductors for use in power control units, which it will begin testing on Japanese roads within the next year. The PCU using the silicon carbide compound offers less electrical resistance, which improves efficiency when passing current between the battery and electric motor. It also loses less power after shutting off, and can operate at a higher frequency. The net power loss of the new PCU is just one-tenth of the current silicone-only version (the latter accounting for 20 percent of total electrical power loss in today's hybrids). The result, so far, is a claimed five-percent improvement in fuel economy in test vehicles, with the potential of ten percent by the time the new SiC power semiconductor comes to market. Additionally, the carbide wafers allow for smaller a power module, coil and capacitor, thus allowing the entire PCU to be 80 percent smaller (see the side-by-side comparison in the accompanying photo, which you can click to enlarge). We've got a while to wait before we start to see the carbide technology to start making a real-world impact. Toyota aims to begin using the SiC units in 2020. By then, with improvements in the company's other key efficiency factors - engine technology and aerodynamics - cars like the Prius will likely see significant gains in fuel economy. Read more in the press release below. Toyota Develops 'Diamond-like' Computer Chips to Boost Hybrid Mileage May 20, 2014 Toyota City, Japan – Toyota is using one of the hardest materials in nature after diamonds to develop a semiconductor chip it hopes will improve the fuel efficiency of its hybrids, such as the Prius, by as much at 10 percent. The company and its partners announced today that they have developed a silicon carbide (SiC) power semiconductor for use in automotive power control units. Toyota plans to begin test-driving vehicles with the technology on public roads in Japan within a year. The chips, made from carbide - one of the hardest materials in nature, theoretically have superior characteristics such as one-tenth the electrical power loss and 10 times the drive frequency. Toyota said the chips would also allow it to reduce the size of current automotive power control units by 80 percent.

Toyota recalling 1.9M Prius models globally for software update

Toyota has announced a set of voluntary recalls covering 960,000 Prius, RAV4, Tacoma and Lexus RX350 models in the United States to address two separate issues. Worldwide, Toyota will have to recall a total of 1.9 million Prius cars.
The Prius recall affects about 700,000 2010-2014 models in the US, due to a fault in the motor/generator control ECU and hybrid control ECU software. It says that the current software could result in high temperatures on certain transistors and possibly damage them. When it fails, the error forces the car into failsafe mode. Toyota says that in rare circumstances, it could even shut the hybrid system down while the car is being driven.
Toyota spokeswoman Shino Yamada told Automotive News that the software update should take about 40 minutes, and dealers would start to be notified about affected vehicles today. She also told them that the first reported glitch occurred in May 2011 in the US when the system overheated and the car entered failsafe mode. The affected cars were built between March 2009 and Feb. 5, 2014, according to Automotive News. Toyota says that it has received no reports of accidents or injuries caused by either fault.