Fj62 1989-restored, Lifted Upgraded! Awesome Truck! on 2040-cars

Auto blog

Toyota Avalon celebrates 20 years with Touring Sport Edition

The Toyota Avalon may not have the sportiest image on the market. Heck, it doesn't even have the sportiest image in the Toyota lineup. But the Japanese automaker is out to fix that perception, at least a little bit, with the launch of the new Touring Sport Edition.
Announced together with some minor updates to the entire Avalon line - consisting primarily of enhanced safety and infotainment systems - the Avalon XLE Touring Sport Edition celebrates the 20th anniversary of Toyota's large sedan line. Setting this special edition apart are a black paintjob, HID headlights, LED daytime running lights, 18-inch alloys (similar in design to those on the Scion FR-S) and an interior decked out with perforated leather with dark blue trim... plus, of course, the requisite special badges inside and out.
Only 2,500 units will be offered with a $37,170 sticker price that puts it near (if not quite at) the top of the Avalon range that's capped by the $41,700 Avalon Hybrid Limited. Pricing has increased on most models by around two percent, and you can scope out all the details of the updates to the full range in the press releases below.

Fewest vehicles ever found eligible for Most American survey

Once again, the most American car on the market is from an American brand. The Ford F-150 retained its number one spot in Cars.com's annual survey of the most American vehicles, trumping the Toyota Camry, which remains at number two.
Ford taking the top spot is small consolation, though, as the Detroit Three aren't too well represented here. General Motors scored a win at number seven, with the Chevrolet Corvette, while Chrysler squeaked in at number ten, with the Dodge Viper. Outside of those three vehicles, Toyota and Honda dominate the top ten.
What's most remarkable, though, is that there were so few cars available for this year's list.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.