Base Certified Suv 5.7l Cd Navigation 14 Speakers Dvd-audio Mp3 Decoder Spoiler on 2040-cars

Auto blog

5,000 Toyota Prius V models recalled due to airbag issue

Toyota has issued a recall of roughly 5,000 Prius V hybrids. All of the affected vehicles are from model years 2014 and 2015. The problem with the hybrid MPVs centers on its Occupant Classification System. According to the company, the OCS is responsible for activating and deactivating the passenger's side airbag, and in the affected models, the system may not have been calibrated correctly. Should a crash occur, the passenger front airbag may not deploy. The company reports there have been no injuries or fatalities related to the OCS faulty calibration. Owner will be notified and will, naturally, be asked to report in for a free recalibration. TOYOTA RECALLS CERTAIN 2014-2015 MODEL YEAR PRIUS V VEHICLES TORRANCE, Calif. – Toyota Motor Sales, U.S.A., Inc., today announced plans to conduct a safety recall of approximately 5,000 Model Year 2014-2015 Prius V vehicles. In the involved vehicles, the front passenger seat is equipped with an Occupant Classification System (OCS), which activates / deactivates the passenger seat air bag system depending on the weight of the seat occupant. There is a possibility that some OCS's may not have been calibrated properly during the vehicle manufacturing process. Under some conditions, this could result in no deployment of an airbag, increasing the risk of an injury to a front seat passenger in the event of crash. Toyota is not aware of any injuries or fatalities caused by this condition. Owners of the involved vehicles will receive a notification by first class mail. Toyota dealers will recalibrate the Occupant Classification System properly. Detailed information is available at www.toyota.com/recall and by calling Toyota Customer Service at 1-800-331-4331. ###

Toyota sells off Tesla shares, too

The incredible rise of Tesla's stock price has done little to now stop two major shareholders from ditching their stake in the American EV manufacturer. First, Daimler, parent company of Mercedes-Benz, ditched its four-percent stake, and less than a week later, Toyota is doing the same thing, selling off an undisclosed bit of its Tesla investment.
The move comes as Toyota winds down sales of the RAV4 EV, which gets its batteries and electric motor from Tesla at the company's Fremont, CA factory.
"We have a good relationship with Tesla, and will evaluate the feasibility of working together on future projects," Toyota spokesperson Kayo Doi told Bloomberg via email.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.