1989 Toyota Land Cruiser Base Sport Utility 4-door 4.0l on 2040-cars

Auto blog

Subaru to stop building Camry for Toyota in the US

It was back in 2007 that Subaru of Indiana Automotive, under contract from Subaru minority shareholder Toyota, built the first Toyota Camry at its plant in Lafayette, Indiana. Rumblings of the end of that contract work have been around for a while, as Subaru talked of expanding capacity to build more units and add a line for the Impreza, and Toyota talked of moving Camry production to its Georgetown, KY plant. The news was official internally last November when SIA Executive Vice President Tom Easterday told the Louisville Courier-Journal that Camry production would end. Now, Automotive News reports that both automakers have admitted publicly that the end will come in 2016.
SIA currently has a 170,000-unit capacity devoted to the home-brand Legacy and Outback models, while a $400-million expansion increases that to 300,000 units to prepare the facility for Impreza production in two years. Freeing up the 100,000 units of production devoted to the Camry means a 400,000-unit capability, which is far more than Subaru needs at the moment, but the Toyota exit will allow it to expand any way it sees fit. Subaru has said it will absorb the workers on the Camry line and no jobs will be lost, the mayor of Lafayette saying the development could change the timetable for the expansion.

Toyota recalling small number of 2014 FJ Cruisers for possible steering failure

Toyota is issuing a fairly tiny recall to fix a potentially serious problem in the FJ Cruiser. The company is recalling about 120 examples of the rugged SUV from the 2014 model year because the steering can fail. According to Toyota, the intermediate shaft that connects the steering wheel and steering gear box might not be welded correctly and can separate. If this happens, drivers lose steering control, which is obviously a major safety concern. However, the automaker is not aware of any crashes, injuries or fatalities from the problem. On the small number of affected models, Toyota will replace the intermediate shaft with a new one. TOYOTA RECALLS CERTAIN 2014 MODEL YEAR FJ CRUISER VEHICLES TORRANCE, Calif., February 5, 2015 – Toyota Motor Sales, U.S.A., Inc., today announced it will conduct a safety recall of approximately 120 Model Year 2014 FJ Cruiser vehicles. The steering system contains an intermediate shaft, which connects the steering wheel to the steering gear box. In the involved vehicles the intermediate shaft could have received an inadequate weld. Under some circumstances, the weld could separate, resulting in the loss of steering control and increasing the risk of a crash. Toyota is not aware of any crashes, injuries, or fatalities caused by this condition. Owners of the involved vehicles will receive a notification by first class mail. Toyota dealers will replace the intermediate shaft. Detailed information is available at www.toyota.com/recall and by calling Toyota Customer Service at 1-800-331-4331.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.