2010 Toyota Highlander Hybrid Sport Utility 4-door 3.3l on 2040-cars

Auto blog

There's a familiar ring to this 1966 video of GM's hydrogen ElectroVan

"What we need is fuel cells that can run on a hydrocarbon fuel and air." It can be fun and educational to revisit the past as we look into the future. While we do have cars that plug in today, the first big batch of hydrogen powered vehicles is not yet arrived (but the Hyundai Tucson Fuel Cell CUV is leading the way). The idea of hydrogen as a promising future technology was also true in 1960s, when General Motors made a promotional movie for the ElectroVan. Turns out, the future then shared more than a little with the future now. As you can see in the short promotional video below for the hydrogen-powered ElectroVan, a modified 1966 GMC HandiVan, a big hurdle in the mid 1960s was the difficulty of obtaining hydrogen fuel. GM offered a possible solution at the time: "Hydrogen and oxygen are expensive and impractical fuels for a car. What we need is fuel cells that can run on a hydrocarbon fuel and air." Unlike today's hydrogen fuel cell cars, the ElectroVan used liquid hydrogen-oxygen fuel cells to get a range of between 100 and 150 miles. Not bad for the first hydrogen fuel cell-powered vehicle in the world. GM tested the ElectroVan on the GM grounds before sending it into storage and then to the company's heritage center. For another view to the past, this time with some focus on electric vehicles, take a look at a video from the 1994 Chicago Auto Show, also available below. Twenty years ago, the green vehicle hype was on the Toyota EV-50 electric car, the solar-powered Honda EVX (and a solar Honda racing car) and a hydrogen-powered Mazda Miata. The announcer's enthusiasm is contagious, but as we all know, none of these vehicles ever made it to dealerships. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Chicago Auto Show, Bangshift via YouTube Green GM Toyota Technology Emerging Technologies Electric Hydrogen Cars Videos

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Driving the BMW M2 Competition, Honda Odyssey and Toyota RAV4 Prime | Autoblog Podcast #651

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by West Coast Editor James Riswick. This week, they talk about driving the BMW M2 Competition, Honda Odyssey and Toyota RAV4 Prime. Then they discuss James' experience testing the new Yakima CBX cargo carrier, Autoblog readers' preference for the GMC Hummer EV over the Tesla Cybertruck, and Mercedes-Benz taking a larger stake in Aston Martin. Lastly, they help James' father find a new car in the Spend My Money segment. Autoblog Podcast #651 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving 2020 BMW M2 Competition 2021 Honda Odyssey 2021 Toyota RAV4 Prime Testing the Yakima CBX Cargo Carrier on the Subaru Outback 75% of Autoblog Twitter follower prefer the GMC Hummer EV over the Tesla Cybertruck Mercedes-Benz to boost stake in Aston Martin to 20%, lend it some tech Spend JamesÂ’ fatherÂ’s money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: