Custom Lifted 07 Toyota Fj Cruiser Pro Comp Driving Light Eagle Alloy Parktronic on 2040-cars

Auto blog

Toyota issues stop sale on 6 key models over seat fabrics; recall possible? [UPDATE]

Toyota has issued a stop-sale order on six of its core models due to concerns about the flammability of certain seat fabrics. The issue rests not with the cloth and leather covers themselves, but with a piece of seat heater beneath them that fails to meet US Federal Motor Vehicle Safety Standards for flame retardancy.
There have been no reports of fires or injuries from the affected cars, which include some of Toyota's biggest volume sellers. 2013 and 2014 Camry, Camry Hybrid, Avalon and Sienna models equipped with heated seats are included in the stop-sale, as are 2014 Tundra pickups and Corolla sedans. The exact number of vehicles with the non-compliant materials are still being tabulated, according to The Detroit Free Press.
According to a Toyota spokesman, the National Highway Traffic Safety Administration has been notified, although it remains to be seen if a recall will be issued. Outside of a full recall, though, it's unclear how Toyota will deal with vehicles equipped with the flammable materials that have already found homes.

2017 Toyota 86 Drivers' Notes | Fun, even with an automatic

The Toyota 86 is a car that enthusiasts begged Toyota to build for decades. It's small, lightweight and rear-wheel drive. Thanks to a partnership with Subaru that resulted in the BRZ, this stylish coupe hit the streets in 2012. In the U.S., the car was originally known as the Scion FR-S but was rebadged as a Toyota after Scion was axed last year. Along with a new name, the 86 received updated styling both inside and out as well as a revised suspension and a slight bump in power, at least for the manual models. This Hot Lava-colored car doesn't feature Toyota's slick six-speed manual. Instead it rocks a six-speed automatic with paddle shifters. While some enthusiasts may look down at that, automatics make up more than half of 86 sales. Still, the bones are there, and some people don't think the automatic is all that bad. Either way, we can't encourage enough people to buy these cars, as we want Toyota and Subaru to keep building them. Senior Editor, Green, John Beltz Snyder: When I first slid behind the wheel of the 86, I was surprised to see the gear selector and paddles. It's one of those cars that you don't think of as having anything but a manual transmission. Also, in an interior where all the controls and displays are underwhelming, a set of paddle shifters stands out as one of the few tactile objects in the cabin. I ended up using the paddles quite a bit, and found that I actually enjoyed using them, so much so that I'd actually consider opting for the automatic transmission were I to buy an 86. Despite shifts that aren't as razor sharp as they could be, the car's high-revving engine means that it still feels great to use. Riding an engine like this up to its redline, filling the cabin with noise, is the sort of thing that'll give you goosebumps. Being able to keep both hands on the wheel while shifting is a good thing for engagement in this car, based on my time with it. Plus, when I got stuck in traffic, I didn't have to wear out my left leg. The other brilliant thing about the Toyota 86 is its sense of balance. I loved the way it communicated its load distribution when cornering, whether on or off the throttle or brake. The fact that the nose of this car snaps right to where you want it when you start dialing in steering angle is satisfying. And its low stance and good view out the windshield make it really easy to place on the road.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.