2007 Used 4l V6 24v Automatic Four Wheel Drive Suv Premium on 2040-cars

Auto blog

New Toyota Mirai videos continue questionable hydrogen claims

"Toyota engineers were simultaneously working on a brand new technology that met all the driver's needs with an even smaller carbon footprint." Toyota has released a number of new promotional videos for the hydrogen-powered 2016 Mirai. Most are exactly what you'd expect: pretty, full of promise and vaguely informational. But there was one line in the Product Introduction video that caught out ear. In the Product Information video about the Mirai, the narrator goes into a short history of Toyota's green car advances. After talking about the Prius and the Prius Plug In, making EVs for urban commuting and the rest of Toyota's advanced fuel programs, we hear this: "Never satisfied though, Toyota engineers were simultaneously working on a brand new technology that met all the driver's needs with an even smaller carbon footprint, one that took its lead from nature itself." You can watch the video (and four others) below. Plug In America co-founder Paul Scott told AutoblogGreen, "Show us the math! Toyota claims the FCV has a smaller carbon footprint than their EV, but every paper I've read indicates the FCV uses 3-4 times as much energy to travel a given distance as an EV. If they are making this claim, let's call them out to prove it. Show us the math!" There's some math that comes out in favor of EVs here and here. "BEVs and FCs have a very similar carbon footprint, dependent on fuel source." – Toyota's Jana Hartline Plug-in vehicle advocate Chelsea Sexton went further. "Assuming appropriate comparisons in energy feedstock, basic science doesn't support the notion that the footprint of an FCV is smaller than that of an EV," she told AutoblogGreen, explaining that "appropriate comparison" would mean using similar energy generation methods for both hydrogen and plug-in vehicles. Not the tendency, she noted, "of H2 fans to compare FCVs based on solar-based electrolysis to EVs running on coal-bases electricity and similar shenanigans." Besides, Sexton said, "focusing purely on efficiencies entirely misses the biggest struggles that FCVs face in the market, namely fuel price, inconvenience, and market fear, even if the vehicles themselves are initially subsidized.

Subaru planning to use Evoltis name on battery-electric crossover

Two years ago, Subaru Japan applied to trademark the name "Evoltis" in the U.S. At the time, it was thought the name would accompany the brand's new plug-in hybrid or some component of the hybrid system. Instead, the PHEV we got returned the Crosstrek Hybrid name to active use, after Subaru retired the first non-plug-in Crosstrek Hybrid in 2016. Whither the Evoltis, then? According to CarBuzz, citing "reports from Japan," Subaru will apply the moniker to a coming battery-electric crossover it is developing with Toyota. The automaker previewed the concept version of the crossover in January of this year during a technical meeting in Japan, built atop a flexible platform to accommodate multiple production vehicles from both brands. Subaru's known for exciting concepts that get stripped to comparative blandness for production. Perhaps tired of the ensuing vitriol, reports say Subaru's inverting the process this time, the production model promising to be more radical than the concept. That won't be difficult, seeing the concept looked like an appliance from a low-budget sci-fi movie, and if not for the Pleiades badge on the front fascia most enthusiasts probably would have thought the concept was a Toyota. Underneath the eventual sheetmetal, rumors figure electric motors turning both axles will combine to produce about 280 horsepower, supplied by a battery stout enough for a range of more than 300 miles — note, that could be a Japanese-cycle figure for range. The concept sat next to a cutaway of a boxer engine, so it's possible there'll be a number of powertrains on offer. Additional tech could include the next generation of Subaru's EyeSight driver assistants, and cameras providing a 360-degree view around the crossover. The debut's been mentioned for October 2021, which would be the same month as the next Tokyo Motor Show. Market launch won't happen until nearly 2025. From left field comes news of another Evoltis, however. TopGear magazine and other outlets from the Philippines write that our Ascent is headed to the island nation in the third quarter of this year. Instead of taking that name to Southeast Asia, it will get the name Evoltis — that's what Glenn Tan, the deputy chairman and managing director of Subaru's Philippines distributor Tan Chong International, told journalists at this year's Singapore Motor Show.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.